User's Manual

page 4
The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written authorization it shall not be copied or otherwise
reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings.
2 Introduction
2.1. Scope
2.1.1. Purpose of the document
The Car Sharing Module (CSM) 3.0 is manufactured by peiker acustic GmbH & Co. KG (grantee) and sold
as an OEM product.
According to the US Code of Federal Regulations (47 CFR 2.909, 2.927, 2.931, 2.1033, 15.15(b) etc.),
the grantee must ensure the end-user has the applicable and appropriate operating instructions for the
device. In the case of this product the grantee must notify the OEM to notify the end-user.
peiker acustic GmbH & Co. KG will supply this document to the reseller or distributor to inform him what
must be included in the end user’s manual for the commercial product and which installations guidelines
for the antenna are applicable.
2.1.2. General information
The CSM is assembled in the car after production by specially trained engineers. There are no other
distribution channels except spare part replacement within car service. Please be advised that this
product will need special trained professionals in configuring and installing the product. The product will
be distributed through controlled distribution channel which has special trained professionals to install
this product and will not be sold directly to the general public through retail stores.
The software application using the installed CSM module is up to the car sharing provider. It is also the
responsibility of the car sharing provider to create an end user manual for the installed application.
2.1.3. Contact information
peiker acustic GmbH & Co. KG
Max-Planck-Strasse 32
D-61381 Friedrichsdorf
Germany
http://www.peiker.de
[e-mail]