User's Manual

JOBNAME: CHRY OM (Contenta pu PAGE: 4 SESS: 2 OUTPUT: Tue Feb 12 12:12:39 2008
/chry_pdm/chrysler/owners/com/0306−all−us−pr.hands−free−communication−uconn
To activate the UConnectt system from idle, simply press
the PHONE button and follow the audible prompts for
directions. All UConnectt system sessions begin with a
press of the PHONE button on the radio control head.
Cancel Command
At any prompt, after the beep, you can say 9Cancel9 and
you will be returned to the main menu. However, in a
few instances the system will take you back to the
previous menu.
Pair (Link) UConnectt System to a Cellular Phone
To begin using your UConnectt system, you must pair
your compatible Bluetootht enabled cellular phone.
To complete the pairing process, you will need to refer-
ence your cellular phone Owner’s Manual. The
UConnectt website may also provide detailed instruc-
tions for pairing.
The following are general phone to UConnectt system
pairing instructions:
• Press the PHONE button to begin.
• After the 9Ready9 prompt and the following beep, say
9Setup Phone Pairing.9
• When prompted, after the beep, say 9Pair a Phone9 and
follow the audible prompts.
• You will be asked to say a four-digit Personal Identi-
fication Number (PIN), which you will later need to
enter into your cellular phone. You can enter any
four-digit PIN. You will not need to remember this PIN
after the initial pairing process.
• For identification purposes, you will be prompted to
give the UConnectt system a name for your cellular
phone. Each cellular phone that is paired should be
given a unique phone name.
4