User's Manual

18 PARTIAL SECTION
NOTE: Certain brands of mobile phones do not send the
dial ring to the UConnect™ system to play it on the vehi-
cle audio system, so you will not hear it. Under this situa-
tion, after successfully dialing a number, the user may feel
that the call did not go through even though the call is in
progress. Once your call is answered, you will hear the au-
dio.
Mute/Un-Mute (Mute Off)
When you mute the UConnect™ system, you will still be
able to hear the conversation coming from the other party,
but the other party will not be able to hear you. In order to
mute the UConnect™ system:
•
Press the “Voice Recognition” button.
•
Following the beep, say "Mute."
In order to un-mute the UConnect™ system:
•
Press the “Voice Recognition” button.
•
Following the beep, say "Mute-off."
Advanced Phone Connectivity
Transfer Call to and from Cellular Phone
The UConnect™ system allows on going calls to be trans-
ferred from your cellular phone to the UConnect™ system
without terminating the call. To transfer an ongoing call
from your UConnect™ paired cellular phone to the UCon-
nect™ system or vice-versa, press the “Voice Recognition”
button and say "Transfer Call."
Connect or Disconnect Link Between the UConnect™
System and Cellular Phone
Your cellular phone can be paired with many different elec-
tronicdevices, but can only beactively"connected"with one
electronic device at a time.
If you would like to connect or disconnect the Bluetooth™
connection between a UConnect™ paired cellular phone
and the UConnect™ system, then follow the instruction
described in your cellular phone user’s manual.