User Manual

ManualsBrandsPeiker acustic ManualsElectronicsAdvanced telecommunication Module (ATM), telematics Control Unit

page 5

The copyright protection of this original document remains with Peiker acustic GmbH & Co. KG. Without prior written authorization it shall not be copied or otherwise

reproduced by a third party and shall not be disclosed to competitors. The infringement shall be strictly enforced by applicable civil and criminal legal proceedings.

3 Antenna installation

To comply with the RF exposure requirements of the FCC following requirements have to be fulfilled:

The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20

cm from all persons and must not be co-located or operated in conjunction with any antenna or

transmitter, except in accordance with FCC multitransmitter product procedures. This device is to be

used in mobile or fixed applications only.

Following technologies and frequency bands are supported by the device ATM-01 T1-RoW-4G:

RAT

frequency (Mhz)

band

GSM

850,900,1800,1900

Quad band

WCDMA

900,800,850,2100

VIII,VI,V,I

LTE

850,2600,850,1800,2100

19,7,5,3,1

For mobile and fixed operating configurations the antenna gain, including cable loss, must not exceed

1.47 dBd

at 800 - 900 MHz

3.01 dBi

at 1800 - 2100 MHz

9.21 dBi

at 2600 MHz

for satisfying RF exposure compliance.

It must be ensured by the OEM that the end user has no manual instructions to remove or install the RF

unit of the device.