Specifications
Easyclick radio system
Easyclick spare adhesive tape
5 pieces of adhesive tape for Easyclick wall-mounted transmitters AURA and DIALOG,
size: 79 x 79 mm 45 KF 579513
Easyclick flush-mounted receiver Plus with support plate, 1 channel
This Easyclick flush-mounted receiver switches lights and other electrically powered units 451 FU-EP UP o.A. 348013
according to various selectable functions and parameters.
• With support plate for screw attachment in switch sockets with 60 mm distance
to the device screws
• Socket board for the attachment of the button fixture xx.420.xx for switching (local)
Standard function: Button fixture: 1-pushbutton function,
Easyclick transmitter: 2-pushbutton function.
Selectable functions with button fixture: sequential pushbutton function, staircase lighting
function with settable switching off delay and advance OFF warning, automatic off after a
settable delay.
Selectable functions with Easyclick transmitter: 1-pushbutton function, sequential push-
button function, staircase lighting function with settable switching off time and advance
OFF warning, automatic OFF after a settable delay, save and activate 4 light scenarios at
the touch of a button (i.e. for a 4-channel transmitter one light scenario per pushbutton).
One function can be specified individually per transmitter once it has been trained.
Connection data: Filament lamp (ohmic load) 2500 W
High-voltage halogen lamps 1250 W
Electronic ballast 3 pieces
IP 20, 230 V, 50 Hz, neutral conductor required.
Up to a total of 30 transmitters can be trained.
Easyclick flush-mounted receiver Plus, 1 channel
This Easyclick flush-mounted receiver switches lights and other electrically powered units 451 FU-EP o.T. 363113
according to various selectable functions and parameters.
Standard function: 2-pushbutton function.
Selectable functions: 1-pushbutton function, sequential pushbutton selection, staircase
lighting function with settable switching off delay and advance off warning, automatic OFF
after a settable delay, ventilator control with delayed ON and automatic OFF,
4 light scenarios, all can be saved and activated at the touch of a button (one light scenario
per pushbutton), ventilator control with window monitoring.
One function can be specified individually per transmitter once it has been trained.
Connection data: Filament lamp (ohmic load) 2500 W
High-voltage halogen lamps 1250 W
Inductive load 600 VA
Electronic ballast 3 pieces
Height of casing 27 mm, with fastening clips, IP 20, connection via plug-in terminals,
230 V, 50 Hz, neutral conductor required. Up to a total of 30 transmitters can be trained.
Easyclick Plus flush-mounted receiver, 2 channels
The Easyclick flush-mounted receiver, 2 channels (independently programmable) switches 452 FU-EP o.T. 363213
lights and other electrically powered units according to various selectable functions and
parameters per channel. Standard function: 2-pushbutton function
Selectable functions: 1-pushbutton function, sequential pushbutton selection, staircase
lighting function with settable switching off delay and advance off warning, automatic OFF
after a settable delay, ventilator control with delayed ON and automatic OFF, 4 light
scenarios, all can be saved and activated at the touch of a button (one light scenario per
pushbutton), ventilator control with window monitoring. One function can be specified
individually per transmitter once it has been trained.
Connection data per channel: Filament lamp (ohmic load) 500 W
High-voltage halogen lamps 100 W
Inductive load 100 VA
Electronic ballast 1 piece
Height of casing 27 mm, with fastening clips, IP 20, connection via plug-in terminals,
230 V, 50 Hz, neutral conductor required. Up to a total of 30 transmitters can be trained.
Article designation Colour Article No. Code No.