Specifications

Easyclick radio system
Application examples Schematic diagram
Components used
Security – a ventilation control with window
contact
A window contact can be used to control a
fume extractor hood, via an Easyclick flush-
mounted receiver Plus. If there is a fume extrac-
tor hood and an open fire, e.g. hearth, fire-
place, or stove in the same room, the extractor
can only be activated so long as a window
contact reports “Window OPEN”. This pre-
vents an accumulation of CO in the room
which the open fire might otherwise cause.
The relay contact in the receiver switches ON
as soon as the window contact reports OPEN.
And vice versa the relay resets as soon as all
window contacts report CLOSED. As an
alternative a plug adapter receiver can be
used.
Easyclick window contact 450 FU FK
Easyclick flush-mounted receiver Plus
1 channel451 FU-EP o.T.
Plug adapter receiver Plus switch or dim
with a mini hand transmitter
A battery-free 4 channel hand transmitter
switches or dims floor or table lamps with
one button respectively with a Plus plug
adapter receiver.
These are easily programmable, whereas
additional transmitters can activate ad-
ditional functions – such as automatic
switching off after a selected time.
Naturally the mini hand transmitters can
also be integrated into the other appli-
cation examples.
Easyclick miniature hand-held transmitter,
4 channels 450 FU HS 4
Easyclick adapter receiver Plus
4511 FU-EP ST
Easyclick adapter receiver Plus
4511 FU-EP DAB ST
Easyclick wall-mounted transmitter,
2 channels 20.450.xx FU-BLS
Window contact
Controlling the shutters either individually or
centrally
Two sets of shutters can be controlled via one
Easyclick flush-mounted JR receiver Plus – in-
dividually using two 2-channel wall-mounted
transmitters or, with an additional 2-channel
wall-mounted transmitter, they can be con-
trolled centrally. This control flexibility can be
modified and extended at any time.
Easyclick wall-mounted transmitter,
2 channels 20.450.xx FU-BLS JR
(for local operation)
Easyclick wall-mounted transmitter,
2 channels 20.450.xx FU-BLS JR
(for central operation)
Easyclick flush-mounted JR receiver Plus,
2 channels 452 FU-EP JR o.T.
Set of shutters 1
Set of shutters 2
Group control
Controlling the lighting and ventilation in the
bathroom and guest toilet
With a 2-channel wall-mounted transmitter
the light can be switched on via an Easyclick
2-channel flush-mounted receiver Plus and
after approx. 3 minutes the ventilation can
be switched on too. The ventilation is switched
OFF again automatically after a settable time
from when the light is switched off.
Easyclick wall-mounted transmitter,
2 channels 20.450.xx FU-BLS
Easyclick flush-mounted receiver Plus
2 channels
452 FU-EP o.T. (for light and ventilation)