Specifications

System extension for even more
possibilities
Use the in-wall receivers
with support plate in con-
nection with conventional
button fixtures for the local
operation of your receiver!
Here the radio transmitter
is no longer needed – this
means savings with no loss
of functionality!
The switch can be ex-
tended with additional
transmitters.
The new in-wall receivers with support
plate enable you to use a conventio-
nal button fixture instead of a radio trans-
mitter for local operation. That saves
money! Furthermore, setting additional
wall or hand transmitters or setting the
Easyclick-timer is even more comfortable:
Just pull off the button fixture and adjust
the settings! Of course there are new in-
wall receivers with support plate with
the well proven function variety for all
areas: Switching, dimming and as a
blind or shutter control.
✔ Cost-efficient
✔ Comfortable and
easy installation and
programming
✔ Group, central and scena-
rio functions possible
Easyclick 2-level repeater are used
between Easyclick transmitters and
receivers to enhance the range or for
construction specific reasons. In the
1-level operation the radio signal of a
transmitter is received, verified and
sent to the respective receiver with the
maximum transmission power. In the
2-level operation a radio signal can
be sent over an even greater distance
using maximum two repeaters to the
respective receivers – and this without
any configuration effort! The Easy-
click 2-level repeater is available in
the SCHUKO plug casing and as a
in-wall device.
Repeater in the 1-level opera-
tion plug casing or in-wall
Wall-mounted
transmitter
Receiver
Repeater in the 2-level opera-
tion plug casing or in-wall
Wall-mounted
transmitter
ReceiverRepeater in the 2-level opera-
tion plug casing or in-wall
Replace conventional
switches with radio
system
Example shutter control