User's Manual

WL-194g Hardware & Driver Reference
4
LED BLINK DEFINITION
2-pin header is added on PCBA and it is capable to drive one LED
and provide the radio status. The LED is super yellow-green &
radio status is shown below.
Status LED (Yellow & Green)
OFF Device is disabled or radio is OFF
ON Radio is ON
SPECIFICATION
Antenna Length 82.5±2mm
Connector SMA Plug Reverse
Color Black
Operating Freguancy 2.4~2.5GHz
Polariation Type Linear Vertical
Type of Radiation Omni-directional
Peak Gain 2.0 dBi Typical
Impedance 50 Ohm
V.S.W.R. 2.0:1 Max.
Coaxial Cable RG-178 Coaxial Cable
ENVIRONMENT
Operating Temperature -10~50
Operating Humidity 20~90%
Storage Temperature (Non-Operational) -40~60 (at humidity of 50%)
Storage Humidity (Non-Operational) 20%~95% (at temperature of 25~60)
PACKING INFORMATION
Packaging is customized by customers. Standard packaging is as
follows:
• PCIe card x1
• Antenna x1
• Carton (40 in 1)
• Low prole bracket x1 (optional)
INTRODUCTION