User's Manual
Table Of Contents
WL-227N Hardware & Driver Reference
4
FEATURES AND SPECIFICATIONS
Features Description
Network Standard Fully comply with IEEE 802.11n draft 2.0 and IEEE 802.11 a/b/g
standards
Chipset Highly Integrated MIMO 2T3R MAC/BBP chip (RT2880) with PCI
Interface and Single-chip Transceiver (RT2850) with
2.4 GHz (low-band) and 5~6GHz(high-band) ISM bands
Transmitter/Receiver Two Tx transmits from transceiver through external PAs to the antennas.
Mechanism Three Rx act as MIMO coming from the antennas.
Host interface Mini PCI Type III A, 124 Pin
Dimension L: 59.8.mm by W:51.8mm
Data Rate 300Mbps Receive PHY Rate, 300Mbps Transmit PHY Rate and
supports 2 streams
Modulation Modulation Technology support Orthogonal Frequency Division
Multiplexing (OFDM), DSSS
Operating Frequency 2.4 ~ 2.5GHz and 4.9~5.9GHz
Operating Channels Ch1~Ch14, CH36~CH48,CH52~CH64,CH149~CH161
Antenna Connectors 3 U.FL I-PEX RF connectors
Security 64-bit/128-bit WEP, TKIP, and AES hardware encryption
Wi-Fi alliance WPA, WPA2
Driver Support OS Linux
Transmitter/Receiver Two Tx transmits from transceiver through an external PA to the antenna.
Mechanism Three Rx act as MIMO coming from the antennas.
Weight NW 14g
Application This module will be used in a 12 inch or greater laptop.
INTRODUCTION
This module will be used in an AP or server.







