User's Manual
Table Of Contents
- Before You Begin
- Cisco WAP571E Wireless-AC/N Premium Dual Radio Outdoor Access Point Features
- Mounting the Cisco WAP571E Wireless- AC/N Premium Dual Radio Outdoor Access Point
- Connecting the Cisco WAP571E Wireless- AC/N Premium Dual Radio Outdoor Access Point
- Verifying the Hardware Installation
- Getting Started with the Configuration
- Suggested Next Steps
- Rebooting the Devices or Returning them to their Factory Default Settings
- Where to Go From Here
1 Cisco WAP571E Wireless Access Point
Welcome
Thank you for choosing the Cisco WAP571E Wireless-AC/N Premium Dual
Radio Outdoor Access Point. The Cisco WAP571E is an outdoor dual radio
802.11ac + 802.11n access point.
This guide is designed to familiarize you with the general layout of the
access point, describe how to deploy the device in your network, and
describe how to configure the device. Your access point has more features
and functionality than what is described in this guide. For additional
information, see the Administration Guide. A link to the Administration
Guide is found in Where to Go From Here.
Package Contents
• Wireless Access Point
• Mounting kit
• This Quick Start Guide
• Ethernet cable
• Pointer Card with China RoHS
• Technical Support Contacts
• EU Directives 1999/5/EC Compliance Information (for EU SKU only)
Before You Begin
Before you begin the installation, make sure that you have the following
equipment and services:
• A computer with browser support for:
– Internet Explorer v7.0 or later
– Chrome v5.0 or later
– Firefox v3.0 or later
–Safari v3.0 or later
• Tools for installing the hardware
• One or more Ethernet network switches with PoE
1