User's Manual
Table Of Contents
- Before You Begin
- Cisco WAP571E Wireless-AC/N Premium Dual Radio Outdoor Access Point Features
- Mounting the Cisco WAP571E Wireless- AC/N Premium Dual Radio Outdoor Access Point
- Connecting the Cisco WAP571E Wireless- AC/N Premium Dual Radio Outdoor Access Point
- Verifying the Hardware Installation
- Getting Started with the Configuration
- Suggested Next Steps
- Rebooting the Devices or Returning them to their Factory Default Settings
- Where to Go From Here
9 Cisco WAP571E Wireless Access Point
Verifying the Hardware Installation
To verify the hardware installation, complete the following tasks:
• Check the cable connections.
• Check the state of the indicator lights.
NOTE If you need help resolving a problem, visit the Cisco Support
Community at www.cisco.com/go/smallbizsupport.
Label Activity Description
Power
Off The WAP571E is out of power.
Solid (Green) The Cisco WAP571E is normal; no wireless
client connected.
Solid (Blue) The Cisco WAP571E is normal; at least one
wireless client connected.
Flashing (Blue) The Cisco WAP571E is upgrading the
firmware.
Solid (Red) The Cisco WAP571E fails to boot with both
firmware images.
5