Manual PEGATRON UPWL6031SP
1.General Description The UPWL6031SP wireless module is a fully assembled and tested general-purpose module using the BCM4331 wireless System-on-Chip(SoC). The module contains BCM4331 chip and all other necessary components to operate the UPWL6031SP. For detailed information on the UPWL6031SP component itself, refer to the UPWL6031SP datasheet. 2. Features Features Description Network Standard IEEE 802.11 b/g/n (final n) Chipset BCM4331(100pin) Input Voltage 3.3V Data Rate 802.11b: 1, 2, 5.
Ant. Brand Part No. Antenna Type Connector Gain (dBi) 1 Hong Lin 290-30209 PCB I-PEX 2.87 2 Hong Lin 290-30250 PCB I-PEX 2.94 3 Hong Lin 290-30350 PCB I-PEX 2.75 4 INPAQ DAM-L8-B-M1-100-02-00 PCB I-PEX 2.94 3. Benefits Small, self-contained SMT module. 3X3 MIMO function support Comply with 802.11n criteria For product available in the USA/Canada market, only CH1~CH11 can be operated. Selection of other channels is not possible.
IMPORTANT NOTE: This module is intended for OEM integrator. The OEM integrator is responsible for the compliance to all the rules that apply to the product into which this certified RF module is integrated. Additional testing and certification may be necessary when multiple modules are used. 20cm minimum distance has to be able to be maintained between the antenna and the users for the host this module is integrated into.
Safety statements Regulatory Information/Disclaimers Installation and use of this Bluetooth device must be in strict accordance with the instructions included in the user documentation provided with the product. Any changes or modifications (including the antennas) made to this device that are not expressly approved by the manufacturer may void the user’s authority to operate the equipment.
Safety Information In order to maintain compliance with the FCC RF exposure guidelines, this equipment should be installed and operated with minimum distance [20cm] between the radiator and your body. Use only with supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regulations. CAUTION! Any changes or modifications not expressly approved in this manual could void your authorization to use this device.
System requirements Before installing the PEGATRON WIFI module, make sure that your system meets the following requirements: Intel® Pentium® 4 or AMD K7/K8 system Minimum 64MB system memory Windows® XP/VISTA operating system Installing the device drivers To install the device driver in your computer: Insert the support CD to the optical drive and follow the following procedure.
Step 2
Step 3
Step 4
Step 5
