User's Manual

User's Manual 6-6



Real Time Clock

Problem Procedure

The BIOS setting
and system date/
time are lost.

The lasting time of the Real Time Clock (RTC) has
run out - you will need to set the date and time in
the BIOS setup utility by using the following steps:
1. Launch the BIOS setup utility.
Please refer to the TOSHIBA Setup Utility
section for further information.
2. Set the date in the System Date field.
3. Set the time in the System Time field.
4. Select Save and Exit -> Exit Saving
Changes- a confirmation message will be
displayed.
5. Select Yes - the BIOS setup utility will end
and the computer will restart.


Display screen

Apparent computer's display screen problems may be related to the
computer's setup and configuration.

Problem Procedure

No display Adjust the display priority, and to make sure it is
not set for output to an external monitor.

Markings appear on
the screen

These marks may have come from contact with the
touch screen. You should try to remove the marks
by gently wiping the screen with a clean dry cloth or,
if this fails, with a good quality LCD screen cleaner.
In this latter instance you should always follow the
instructions with the screen cleaner and always
ensure you let the screen dry properly.