User's Manual

User's Manual 4-7



Figure 4-6 Replacing the pen tip

Product appearance depends on the model you purchased.

Do not continue to use a broken pen tip as this may result in
scratching of the display screen. When the pen tip breaks, replace it
with one of the refills delivered with the Stylus Pen. When these refills
have run out, you can purchase a new pen set from a TOSHIBA
authorized dealer.
Always use the refills delivered with the Stylus Pen. Use of an
incompatible refill may cause a malfunction or characteristic
deterioration.


A short and worn pen tip is difficult to pull out. Replace the pen tip with
a refill before it becomes too short to remove.
It is recommended that you keep another pen set as a spare. You can
buy replacement pen sets from your TOSHIBA authorized dealer.


3D Pla yba c k on an Ext e rnal 3D Device
3D playback on an external 3D device feature is only provided with
TOSHIBA WT10-A models.
Effect of 3D can be shown only on an external 3D devices connected via
an HDMI output. It cannot be shown on the internal display. In order for 3D
playback to work on external display/TV, you need a 3D enabled display
TV that has an HDCP compliant HDMI port.

3D playback feature supports the following resolutions:1920x1080 24Hz
and 1280x720 60Hz.
Please change the Screen Resolution to one of the above before using 3D
playback function.


Import ant Safe ty I nform ation for 3 D Function

Please refrain from or stop viewing if you feel ill or experience
discomfort before or while watching 3D video images.
Please refrain from viewing 3D video images if you experience
convulsions, photosensitivity reaction, or heart disease.