User's Manual

AC Power Cord and Connectors
The power cord’s AC input plug must be compatible with the various
international AC power outlets and the cord must meet the standards for
the country/region in which it is used. All cords must meet the following
specifications:
Wire size:
Current rating:
Minimum 0.75 mm2
Minimum 2.5 amperes
Certification agencies
China:
U.S. and Canada:
Australia:
Japan:
Europe:
CQC
UL listed and CSA certified
No. 18 AWG, Type SVT or SPT-2
AS
DENANHO
Austria:
Belgium:
Denmark:
Finland:
France:
Germany:
OVE
CEBEC
DEMKO
FIMKO
LCIE
VDE
Italy:
The Netherlands:
Norway:
Sweden:
Switzerland:
United Kingdom:
IMQ
KEMA
NEMKO
SEMKO
SEV
BSI
In Europe, two conductors power cord must be VDE type, H05VVH2-F or
H03VVH2-F and for three conductors power cord must be VDE type,
H05VV-F.
For the United States and Canada, two pin plug configuration must be a
2-15P (250V) or 1-15P (125V) and three pin plug configuration must be
6-15P (250V) or 5-15P (125V) as designated in the U.S. National Electrical
code handbook and the Canadian Electrical Code Part II.
The following illustrations show the plug shapes for the U.S.A. and
Canada, the United Kingdom, Australia, Europe and China.
User's Manual 7-3