User's Manual

Set up + software 23
CONNECT REX TO POWER
Connect REX to the external power supply and connect the power supply to an electrical outlet.
SET-UP CONTROLS
To set up REX, you’ll use two simple REX controls: the clickable knob and the back button. Just
rotate the clickable knob to highlight an on-screen option. Press the knob to select an option
and move ahead. To move back, or cancel out of an option, press the back button.
COPY SETTINGS FROM ANOTHER REX
When you set up an additional REX, you’ll be asked to have an existing REX “discover” the
new one. This lets the new REX copy settings. When prompted, go to any other REX that
you’ve already set up. Press the two far left multifunction keys at the same time. Hold them
down until the REX enters Discovery mode, about 3 seconds.
SAVE YOUR SETTINGS
After you complete the set-up wizard, REX saves your settings even if you unplug the unit.
If you unplug a REX unit prior to completing the wizard, however, REX erases the settings
from memory. If you want to erase your settings and restart the wizard from the beginning,
just unplug the unit before you complete the wizard.
CHANGE YOUR SETTINGS
You can always change settings after set up. Select Source: Setup to manage your settings.
Set-up Steps
Step 1. Name the REX
Step 2. Connect to another REX
Step 3. Connect to home network
Step 4. Set favorite server
Step 5. Set date and time
Step 1
Step 2
Step 3
Step 4
Step 5