User's Manual

22 Set up + software
If you’re setting up more than one REX, don’t worry about which one to set up rst. It
doesn’t matter—pick one and get started.
Set up + software
Set-up wizard
Before you can listen to music, REX needs to learn about you and your home network. When
you rst connect a REX to power, a set-up wizard automatically begins. The wizard guides you
though the set-up process. During set-up, REX collects information about other REX devices,
your home network, and your preferences. It takes only a few minutes to complete set up and
start listening to music.
The wizard lets you skip steps in the set-up process. If you choose to skip steps, you may not
be able to use all the capabilities of REX until you input the settings manually at a later time.
BEFORE YOU START
Before using the set-up wizard to guide you through set up, a bit of preparation is helpful.
• If REX will use a wired connection to your network, connect REX to the
network router with an Ethernet cable.
• If you have a wireless network, make sure your router is turned on.
• Share the media player software on the home computer you will most often use to
access music.
ADDITIONAL REXES
Setting up an additional REX is even easier than setting up the rst. Additional units will copy
most of their settings from a REX you’ve already set up. You’ll just need to name the additional
unit and allow it to be “discovered” by another REX (see FIGURE 13). For this reason, don’t run
the set-up wizard on more than one REX at a time.
Set-up Wizard Welcome Screen
FIGURE 13