User's Manual

Zhone 6388-A2 4-Port Wi-Fi with In-Line Filter
User Manual 43
Version 1.0
Document #: BD-ZU0042-10
Analyzer
This section shows a diagnosis of the various statuses.
Ping Test
Once you have your router configured, make sure you can ping the network. You can
get to the Ping web page by going to the Home screen, under the Tools title, and
clicking Ping Test. Type the target address that you want to ping. If you have your PC
connected to the router via the default DHCP configuration, you should be able to ping
the network address 192.168.1.1.
If your ISP has provided their server address you can try to ping the address. If the
pings for both the WAN and the LAN side complete, and you have the proper protocols
configured, you should be able to access the Internet.
By default when you select ping test, the router will ping itself 3 times. If this first ping
test does not pass, the TCP/IP protocol is not loaded for some reason, then you should
restart the router.