User's Manual

Zhone 6388-A2 4-Port Wi-Fi with In-Line Filter
User Manual 35
Version 1.0
Document #: BD-ZU0042-10
Wireless
The Wireless section allows you to configure the router’s wireless connection.
Setup
The setup contains the wireless LAN user settings.
Below are the procedures for setting up the configurations—
l Enable AP: Enabling the Access Point (AP) turns on the router’s wireless
capability. To use wireless devices, verify that the box is checked.
l SSID: Specify the Service Set IDentifier (SSID) for your wireless LAN. It can
be up to 32 characters and cannot include spaces.
l Hidden SSID: Enable Hidden SSID by clicking in the check box. When
Hidden SSID is enabled, the SSID is not advertised. Users must know the
SSID to connect to the wireless LAN.
l Channel B/G: Specify the RF (Radio Frequency) channel (1–11) for the
router to use. Recommended values are 1, 6, and 11. These three values do
not overlap and could be used by three neighboring wireless LANs.
l 802.11 Mode: Specify whether the router will support only 802.11b (11
Mbps) clients, only 802.11b+ clients (22 Mbps), only 802.11g (54 Mbps)
clients, or all. To allow any client to connect, select Mixed.
l 4X: Enable 4X mode only if all clients that will connect to the wireless LAN
support 802.11b+.
l User Isolation: Select if you want to forbid communications between users
on the wireless LAN.