Installation Guide

8
Installing the diverter handle
□ Before installation, place the diverter handle (P)
onto the inverter (1) and turn it clockwise until
it stops, then remove the diverter handle (P).
□ Reinstall the diverter handle (P) facing forward
onto the inverter (1) and tighten set screw (O)
with the Hex wrench (Hex: 2.5mm, AA). Insert
the index (N).
7
Installation (continued)
9
Installing the spray support
□ Remove the preassembled mounting nut (Y) and
washers (W & X) from the spray support (V).
□ Insert the spray support (V) through the hole in
the deck.
□ Secure the spray support (V) with the rubber
washer (W), metal washer (X) and mounting
nut (Y).
10
Installing the spray
assembly
□ Insert the spray assembly (Z) into
the spray support (V).
N
O
AA
P
1
V
W
X
Y
Z
V
WWW.HOMEDEPOT.COM/PEGASUS
Please contact 1-877-580-5682 for further assistance.