Installation Guide

12
Adjusting the temperature
5
Reinstall the red limit stop ring
□ Reinstall the red limit stop ring (1) and readjust
the teeth engagement position so that the stem
can not move beyond the adjusted point.
6
Reinstalling the handle,
escutcheon, and inverter
1
□ Place the inverter (1) onto the valve body (D)
and secure with the screw (2).
□ Screw the sleeve (3) onto the valve body (D).
□ Place the escutcheon (E) onto the valve
body (D) and secure with the escutcheon
screws (AA).
□ Place the handle (F) onto the valve body (D)
and secure with the set screw (G).
2
E
AA
G
F
1
3
D