Installation Guide

5
Installation (continued)
4
Installing the drain body
□ Place the drain ange (K) into the drain hole
of the sink, make sure the rubber washer (L)
under the drain ange (K).
□ From underneath the sink, screw the drain
body (O) onto the drain ange (K). Ensure that
the opening (1) for the ball rod on the drain
body (O) faces towards the rear of the sink.
3
Preparing the pop-up assembly
□ Remove the pop up stopper (J), drain ange (K)
and rubber washer (L) from the drain body (O).
□ Screw the lock nut (N) in a counter-clockwise
direction, and push the rubber washer (M)
down.
□ Screw the lock nut (N) in a clockwise direction,
and push the rubber washer (M) up to tighten
the drain body (O). Do not overtighten.
J
K
L
M
N
O
2
3
1
1
2
K
L
M
N
1
O
3
WWW.HOMEDEPOT.COM/PEGASUS
Please contact 1-877-580-5682 for further assistance.