Instructions / Assembly

For the love of all
Peet Dryers, please...
• Before first use, leave dryer plugged-in
without gear and let it run for 15 minutes on
its own. This removes any factory resin to
ensure future drying is completely odorless.
• Keep air vents on the base of dryer free
from any obstacles or obstruction. Do not
place dryer too close to a second
heat source.
• Always use Peet DryPort Accessories when
drying gear of any kind. Failing to attach
appropriate Dryports on top of the vertical
tubes (AirChambers) of dryer may cause
damage to dryer and/or gear.
• When drying shoes, for optimal circulation
be sure toes are sitting higher up than heels.
• Leave a minimum of 1” of air space
between any Fan Dryer base and gear at
all times.
• Footwear over 10” tall requires the 12”
Extension DryPort Accessories to be placed
on top of the vertical tubes (AirChambers),
prior to the additional Footwear DryPorts.
• All Peet Dryers, Deodorizers, and
Dehumidifiers are safe to use with any
materials– including leather, fleece, rubber,
synthetics, or GORE-TEX®.
• Maintenance-free, silent operation (all Peet
products besides the Fan Dryers are silent).
Just plug into any household outlet and
start the day with pleasantly toasty dry gear.
Why trust peet with
your beloved feet?
All Peet Dryer’s are safe and
gentle enough to use everyday.
Our Fan Dryers dry your gear in
as little as 1- 4 hours with heat
and no heat settings.
All Dehumidifiers and Portable
Dyers use less electricity than a
standard household light bulb.
All Peet Safe Dehumidifiers
operate silently, gently raising
warm ambient air to dry gear.
Our Fan Dryers use gentle heat
that never over-dries. Safe to
use with all materials.
Let’s face it. Feet perspire and get wet on
a daily basis. Excess moisture inevitably
leads to a build up of bacteria, providing
a space for odor, mold, and mildew to
thrive. Peet Dryers help prolong the life of
your gear by fighting moisture to manage
the environment that bacteria thrives in.
If your using the Advantage Peet (m07f)...
If your using the Family Peet (m203s)...
1 2 3 4 5
OPERATING INSTRUCTIONS
PLEASE NOTE: These instructions
abide to all Fan dryers. This includes
both The Advantage Dryer and The
Family Dryer.
• Follow all precautions on the second panel
of this pamphlet before reading ahead.
• Read ahead for specific instructions
regarding the Advantage or Family Dryer.
• Attach footwear DryPorts on to vertical tubes
(AirChambers). Plug in Dryer and place
items to be dried on top of DryPorts.
• Flip air setting switch to heat or no heat as
desired. Rotate dial to select the length of
drying time.
• Once time is up, the unit will automatically
turn off. Dries gear in 1-4 hours time. Works
with all Peet Dryport accessories.
• Attach footwear DryPorts on to vertical tubes
(AirChambers). Plug in Dryer and place
items to be dried on top of DryPorts.
• Use push button to turn dryer on. Then
press heat or no heat button as desired.
Press plus (+) or minus (–) button to increase
or decrease time in 15 minute increments.
• Once time is up, the unit will automatically
turn off. Dries gear in 1-4 hours. Works with
all Peet Dryport accessories (excluding
the Helmet Dryport and the Deodorizer).
For all Peet Fan Dryers...
1
2
3
C
D
A
B
A
B
C
D
– Electrical Cord
– Prong holder
– Housing plug
– Prongs
• Before following these instructions, make
sure you have followed all precautions on
the second panel of this pamphlet...
• Please read ahead for specific instructions
regarding the Go! Peet Dryer. Otherwise, read
the bullet directly below.
• Simply plug-in the dryer and place a powercell
into each shoe or boot. Dries Overnight.
• DO NOT use these dryers without opening each
one first. Slide one dryer into each shoe/boot
with the DC Jack (the side with the logo) facing
in an upward position.
• Plug in the transformer or the 12 volt adapter
cords into the DC Jacks on the dryers. Dries
overnight (or in 12 hours time).
PLEASE NOTE: These instructions
abide to our Portable dryers – the Go!
Peet Dryer, Powercell Peet, and the
Ultra Powercell Deodorizer.
For all Portable Peet Dryers...
If your using the Go! Peet Dryer (M04)...
PLEASE NOTE: These instructions
abide to all Safe Dehumidifier
dryers– the Large Safe Room, Gun
Safe, 18” & 24” Bar Dehumidifiers.
• Followed all precautions on the second
panel of this pamphlet before reading ahead.
• When placing dryer in safe, be sure to place it
vertically on to the base/ground floor of the
For all Peet Safe Dehumidifiers...
1. Slide the electrical cord through the Plastic
Housing piece until there is a few extra inches of
the Electrical Cord sticking out of the Plastic
Housing piece.
2. Open the Prongs by gently pulling them apart.
Then push the Electrical Cord into the slot of the
back of the Prong Holder and squeeze the
Prongs back together. DO NOT STRIP CORD.
3. Hold the prongs firmly and slide the unit back
into the Plastic housing piece until the Housing
Plug is flush with the Prong Holder.
safe or storage unit (M10 Gun Safe Dehumidifier
fits in corners and can be screwed into safe
padding, and bars feature attachable mounting
feet that slide on to each end of tube so it can sit
horizontally without touching ground) to ensure
warm air rises to the top for proper circulation.
• If you are using a tube dryer (the Gun Safe or
Large Room Dehumidifier), keep the center tube
(AirChamber) upright.
• Feed cord through back of safe (if possible) and
follow electrical installment directions below.
Electrical Cord Installation...