Specifications

7 of 42

ISSUED: 02-15-10 SHEET #: 095-9316-2 08-02-11

Begin with the shortest length screw, hand thread through washer and adapter bracket into display as shown

below. Screw must make at least three full turns into the mounting hole and ﬁ t snug into place. Do not over

tighten. If screw cannot make three full turns into the display, select a longer length screw from the bafﬂ ed

fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.

NOTE: Spacers may not be used, depending upon the type of display.

Begin with longer length screw, hand thread through washer, adapter bracket and spacer in that order into display

as shown below. Screw must make at least three full turns into the mounting hole and ﬁ t snug into place. Do not

over tighten. If screw cannot make three full turns into the display, select a longer length screw from the bafﬂ ed

fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws.

For Flat Back Display

For Bump-out or Recessed Back Display

ADAPTER BRACKET (B)

DISPLAY

WASHER

SCREW

2-2

2-1

If you have any questions, please call Peerless customer care at 1-800-865-2112.

DISPLAY

WASHER

SCREW

ADAPTER BRACKET (B)

SPACER