manual

6 of 11
ISSUED: 08-31-11 SHEET #: 009-9053-7 07-25-12
Insert columns (D) over column base supports (C)
and align cable management holes. Secure columns
to column base supports using four 5/16" socket
screws (K). Tighten screws using 3/16" allen
wrench (P).
3
D
K
M
D
A
L
A
A
D
D
FRONT VIEW REAR VIEW
Lock column bracket (A) in place by installing
four 5/16" set screws (M). Tighten screws against
columns (D) using 4mm allen wrench (N).
Insert column bracket (A) over columns (D) and
adjust to desired height.
65
Insert two 1/4-20 x 12mm socket screws (L) into
column bracket (A) using 4mm allen wrench (N),
leaving 3/16" of exposed thread as shown in detail 1.
4
CABLE MANAGEMENT
HOLES
DETAIL 1
3/16"
C