Specification Sheet

Face of plasterguard
should be flush with
finish wall line
*1/2*-14 threaded tub spout with
slip-on adapter included
2"
(51 mm)
3 1/2"
(89 mm)
7"
(178 mm)
PTT188743
PSP-B-PTT188743 Rev. D
8"
(203 mm)
Min.
18"
(457 mm)
Max.
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
WARRANTY
• ASSE 1016
• EPA WaterSense
®
Trim:
PTT188743
Lever Handle Shower Only
PTT188753
Lever Handle Tub/Shower
STANDARD SPECIFICATIONS
PTT188743
PTT188753
RP44121▲
5 3/8"
(136 mm)
2 7/16"
(62 mm)
RP71609▲
5 3/8"
(136 mm)
2 7/16"
(62 mm)
Full Spray
RP75572▲
4 3/16"
(106 mm)
2 3/4"
(70 mm)
1.5 GPM Max.
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
( )
G
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
( )
7
26.5
Tub Filler
30.3
34.1
8
9
Showerhead
1.5 GPM
• Pressure balanced bath mixing valve.
• Tub/Shower. Requires 1 1/2" wall cavity.
• Back-to-back installation capability.
• Field adjustable means to limit handle rotation
into hot water zone.
• Temperature control to rotate a maximum of 120°F
from full cold to the maximum temperature.
• Single Handle.
• Temperature Only Controlled with Handle.
• Slip-on tub spout, model PTT188753.
▲ Designate Proper Finish Suffix
2 1/2"
(63 mm)
C\L supply lines
Supply
1/2"
(13 mm)
Maximum Allowable Deviation
PTT188753
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and
inishes; or,
for commercial users, for 5 years from the date
of purchase.
• 5 year limited warranty on electronic parts (other
than batteries); or for commercial users, for 1 year
from the date of purchase. No warranty is provided
on batteries.