Specification

Face of plasterguard
should be flush with
finish wall line
2"
(51 mm)
3 1/2"
(89 mm)
7"
(178 mm)
PTT188742 \ PTT188752
PSP-B-PTT188742 Rev. C
8"
(203 mm)
Min.
18"
(457 mm)
Max.
COMPLIES WITH:
• ASME A112.18.1 / CSA B125.1
Indicates compliance to
ICC/ANSI A117.1 - Valve control only
WARRANTY
• ASSE 1016
Rough-In:
PTR188700-UN
PTR188700-UNWS
PTR188700-IP
PTR188700-IPWS
Trim:
PTT188742
Lever Handle Shower Only
PTT188752
Lever Handle Tub/Shower
STANDARD SPECIFICATIONS
• Pressure balanced bath mixing valve
• Tub/Shower. Requires 1 1/2" wall cavity.
• Back-to-back installation capability.
• Forged brass body.
• Field adjustable means to limit handle rotation
into hot water zone.
• Temperature control to rotate a maximum of 120°
from full cold to the maximum temperature.
• Single Handle
• Temperature Only Controlled with Handle
PTT188742
PTT188752
PTR188700-UN
PTR188700-UNWS
PTR188700-IP
PTR188700-IPWS
RP44121▲
Full Spray
RP70536
2.0 GPM Max.
4 5/32"
(106 mm)
2 3/4"
(70 mm)
5 11/32"
(136 mm)
2 15/32"
(62 mm)
WARNING
RE-INSTALL
DISC AFTER
SETTING
ROTATIONAL
LIMIT STOP
WARNING
RE-INSTALL
DISC AFTER
SETTING
ROTATIONAL
LIMIT STOP
3 3/8"
(86 mm)
6"
(152 mm)
2 5/8±1/2"
(67±13 mm)
3 3/8"
(86 mm)
2 3/8"
(86 mm)
Finished
Wall
Stringer
5 5/8"
(143 mm)
6"
(152 mm)
2 5/8±1/2"
(67±13 mm)
3 3/8"
(86 mm)
2 3/8"
(80 mm)
Stringer
Finished
Wall
A
B
PTR188700-UN
PTR188700-UNWS
0
1
2
3
4
5
0 10 20 30 40 50 60 70 80 90
Pressure
(
PSI
)
Flow (U.S.
G
allons Per Minute)
6
0 69 138 207 276 345 414 483 552 621
0
3.8
7.6
11.4
15.1
18.9
22.7
Pressure (kPa)
Flow
(
Liters P
er Minute
)
7
26.5
Tub Filler
30.3
34.1
8
9
Showerhead
2.0 GPM
PTR188700
• Lifetime limited warranty on parts (other than
electronic parts and batteries) and
inishes; or,
for commercial users, for 5 years from the date
of purchase.
• 5 year limited warranty on electronic parts (other
than batteries); or for commercial users, for 1 year
from the date of purchase. No warranty is provided
on batteries.