manual

ISSUED: 10-22-99 SHEET #: 120-9023-2 12-14-09

Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.

4 of 15

Select slot in tray according to diagram 5.1.

Remove backing and attach one clear strip (E)

through slot and around edge of tray as pictured

in diagram 5.2. Repeat for other slot in other side

of tray.

Note: This material prevents fraying or cutting of

the belt.

Place TV onto tray.

Note: Be sure that front bottom edge of TV is

positioned behind and against the front lip of the

tray. This will prevent TV from sliding forward on

the tray.

Take one belt (C or D) and hold it so that the tri-bar belt clip (A) is facing as illustrated. Feed belt (C or D)

up through the slot you have chosen. Remember, belt only goes through outside slot. Now feed belt (C or

D) through belt clip (A) as shown. Repeat on other side of tray using other belt.

TV NOT SHOWN

C or D

TIGHTEN

DIAGRAM

5.2

DIAGRAM

5.1

BELT SLOTS

TILT

NO TILT

TRAY

TV NOT SHOWN

FRONT LIP