manual

ISSUED: 10-22-99 SHEET #: 120-9023-2 12-14-09
Visit the Peerless Web Site at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870.
3 of 15
With TV dismounted, place belt assembly over TV and reposition the components according to dimensions in drawing
below. Note: keep buckle closer to left side of TV to allow for movement when tightening belt assembly. Trim off the
end of the belt if necessary, then lightly burn the end of the belt to prevent fraying. Repeat step 3 for the other side of
the TV.
BELT PLACEMENT WHEN
TV IS IN TILT POSITION
6”
6”
BELT PLACEMENT WHEN
TV IS IN NO TILT POSITION
A
B
Make sure that TV surface is clean of grease, oil and dust. Once all components are in place, remove sticker from
bottom of belt guides and firmly press them onto the TV.
*
**
2”
6”
6”
A
*
B
12”
12”
2”