Operating Guide

ManualsBrandsPeerless ManualsKitchenApex 1-Handle Tub and Shower Faucet in Oil Rubbed Bronze

SINGLE HANDLE WASHERLESS PRESSURE

BALANCED TUB & SHOWER VALVES

MODEL P188775

VÁLVULAS DE REGADRA Y BAÑERA DE PRESIÓN

BALANCEADA SIN ARANDELAS

MODELO P188775

ROBINET DE BAIGNOIRE / DOUCHE MONOCOMMANDE

À ÉQUILIBRAGE DE PRESSION

MODÈLE P188775

Record Your Model Number Here For Future Reference

Anote Aquí Número del Modelo Comprado Para Referencia Futura

Inscrivez le numéro de modèle ici pour pouvoir le retrouver.

ASSEMBLY PARTS LIST

LISTA DE PIEZAS PARA LA INSTALACIÓN

LISTE DES PIЀCES

Description

Descripción

Description

Showerhead

Cabeza de Regadera

Pomme de douche

3 1/2"-5"

(89 mm-127mm)

Shower Arm & Flange

Brazo de Regadera y Brida

Pomme de douche et collerette

Trim Sleeve

Manguito

Manchon de Finition

Valve Body & Cartridge Assembly

Cuerpo de la Válvula y Ensamble

del Casquete

Corps de robinet et Cartouche

Tub Spout (Diverter)

Tubo de Salida para Bañera

(Desviador)

Bec de baignoire avec dérivation

Lever Handle w/Screw

Palanca con Tornillo

Manette avec vis

Escutcheon

Chapetón

Boîtier

Escutcheon Screws

Tornillos para chapetón

Vis pour boîtier

Spacer

Separadores

Piéce D’espacement

Quantity

Calidad

Quantité

You may need

Usted puede necesitar

Articles dont vous pouvez avoir besoin:

Plumber tape:

(NOT PROVIDED)

For use on threaded connections.

Cinta para plomero:

(NO PROPORCIONADAS)

Para uso con conexiones enroscadas.

Ruban de plomberie:

(NON FOURNI)

Pour application sur le ﬁletage des raccords.

Wrench(es) and Screwdriver:

(NOT PROVIDED)

For faucet removal/installation.

Llave(s) y Destornillador:

(NO PROPORCIONADAS)

Para quitar/instalación de fregaderos.

Clé(s) et Tournevis:

(NON FOURNIS)

Pour pose et dépose de robinet

The Peerless

Installation Helpline

1-800-438-6673

www.peerlessfaucet.com

Instruction Manual Printed in China

Manual de Instrucciones Impreso en China

Manuel d’instructions Imprimé en Chine

9/17/15 1

76550 Rev. C

P188775

Estimated Time For Assembly

The estimated time to install this tub and shower valve is 85 minutes.

These estimates do not include removing the old shower system.

Tiempo Estimado para Instalar

El tiempo estimado para instalar esta válvula de bañera y regadera es

85 minutos. Estos estimados no incluyen el tiempo que tomaría quitar el

sistema viejo de regadera.

Durée d’installation estimée

Le temps requis pour l’installation du robinet de baignoire-douche est

estimé à 85 minutes. L’estimation n’inclut pas la dépose de la vieille

robinetterie de douche.

Hole Dimensions

(minimum and maximum

hole size in wall for valve

installation)

Las Dimensiones

de los Hoyos

(el tamaño del hoyo mínimo

y máximo en la pared para

la instalación de la válvula)

Dimension du trou

(dimensions minimales et

maximales du trou dans la

paroi pour l’installation de la

soupape)

Summary of content (8 pages)

PAGE 1
SINGLE HANDLE WASHERLESS PRESSURE BALANCED TUB & SHOWER VALVES MODEL P188775 VÁLVULAS DE REGADRA Y BAÑERA DE PRESIÓN BALANCEADA SIN ARANDELAS MODELO P188775 ROBINET DE BAIGNOIRE / DOUCHE MONOCOMMANDE À ÉQUILIBRAGE DE PRESSION MODÈLE P188775 Record Your Model Number Here For Future Reference Anote Aquí Número del Modelo Comprado Para Referencia Futura Inscrivez le numéro de modèle ici pour pouvoir le retrouver.
PAGE 2
1 7 3 1 2 4 5 6 SHUT OFF WATER SUPPLIES Remove old valve. Install new valve so that the arrows on the bracket (1) point upward. Remove cover (2) and bonnet nut (3). For shower only installation, plug bottom valve outlet with pipe plug (4) (not supplied). Note: Distance (5) from the stringer (6) to the front of the plasterguard is 2 3/4" ± 1/4" (70 mm ± 6 mm). This is the same distance to the finished wall (7).
PAGE 3
4A A. 1 B1. B2. 3 7/8" (98 mm) - 4"(102 mm) 3 2 1 Apply plumber tape Aplique cinta para plomero Appliquez ruban de plomberie 4. SHOWER ARM AND TUB SPOUT DROP PIPE / ELBOW INSTALLATION A. FOR SHOWER ARM INSTALLATION Connect top outlet (1) to shower arm (2) with proper ﬁttings. To prevent damage to ﬁnish on shower arm, insert wall end of shower arm into shower ﬂange (3) before screwing arm into riser connection.
PAGE 4
6 5 1 FLUSH SYSTEM / CHECK FOR LEAKS. Prior to testing, remove cover and bonnet nut. Plug both outlets with proper fittings. Insert cartridge, tighten bonnet nut and turn on water supplies. Turn cartridge stem counter clockwise until it will no longer rotate. Check for leaks. After testing, shut off water supplies, remove cartridge, shower and/or tub spout plug and flush system by slowly turning on water supply to purge valve system of debris. After flushing, reinstall cartridge, bonnet nut and cover.
PAGE 5
9 Hotter Caliente Plus chaude Disc Disco Disque 1st Position Posición Primera 1ère Position Stem Unidad del Vástago Obturateurs Rotational Limit Stop Tope de Limite de Girar Butée anti-échaudage ADJUSTING THE ROTATIONAL LIMIT STOP: • Turn on water so that cold water is as cold as it will get and hot water is as hot as it will get. Place handle back on stem and rotate fully counterclockwise to the hottest position. • Place a thermometer in a plastic tumbler and hold in the water stream.
PAGE 6
▲Specify Finish Valve Body Cuerpo de la Válvula Corps de robinet Especifíque el Acabado Précisez le Fini 3 RP70537▲ Showerhead Cabeza de Regadera Pomme de douche RP6025▲ Flange Brida Collerette RP6023▲ Shower Arm Brazo de Regadera Pomme de douche RP46074 Valve Cartridge Válvula de Cartucho Cartouche 2 RP5417▲ Screws Tornillos Vis 1 RP44117▲ Lever Handle w/Button & Screw Palanca con Botone y Tornillo Manette avec bouton et vis RP50879▲ Trim Sleeve Manguito Manchon de Finition RP14414 Seats & Spri
PAGE 7
CAUTION: This system/device must be set by the installer to insure safe, maximum temperature. Any change in the setting may raise the discharge temperature above the limit considered safe and may lead to hot water burns. WARNING: This pressure balanced bath valve is designed to minimize the effects of outlet water temperature changes due to inlet pressure changes commonly caused by dishwashers, washing machines, toilets and the like.
PAGE 8
Peerless® Lifetime Faucet and Finish LimitedWarranty All parts and finishes of the Peerless® faucet are warranted to the original consumer purchaser to be free from defects in material & workmanship for as long as the original consumer purchaser owns their home. Peerless Faucet Company recommends using a professional plumber for all installation & repair. limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.