manual

5 of 50
ISSUED: 07-12-10 SHEET #: 061-9056-8 03-05-13
Bay door may be removed for ease of installation
to mounting surface. NOTE: Removal of bay door
is optional. Installation may be completed without
removing bay door.
Insert fl athead screwdriver under brass clip of gas
spring shown in detail 1 and pry up. NOTE: Do not
remove brass clip from gas spring. Pull gas spring
away from bay door.
Optional Removal of Bay Door
1
10-24 x .5"
PHILLIPS SCREWS
A
fi g. 1.1
• Grasp bay door fi rmly. Bay door will swing freely when gas springs are removed.
WARNING
Remove center set of 10-24 x .5" phillips screws
from inside of enclosure assembly (A) as shown in
fi gure 1.1. Slide bay door to the right to disengage
hinges and lift off of enclosure assembly.
1-1
DETAIL 1
GAS SPRING
BRASS CLIP
BRASS CLIP
BAY DOOR
MAIN
ENCLOSURE
ASSEMBLY