DS496 Apple® Mac® mini PC Holder Installation and Assembly MAX 10 lb (4.5 kg) NOTE: APPLE MAC MINI 2010 MODELS AND LATER. ENG APPLE MAC MINI NOT INCLUDED.
Parts List A Part Description computer box Quantity 1 Part Number 125-1458 B box cover 1 124-1459 C alternate support bracket 4 124-1141 D M4 X 10mm socket pin 4 520-1060 E M4 X 10mm serrated washer head socket pin screw 2 510-1060 F M5 X 10mm type-F socket pin screw 8 520-1164 G #10 x 1/2" TEK phillips screw 4 520-1320 H cable tie 6 560-9711 I 4mm security allen wrench 1 560-9646 A (1 ) D (4 ) M4 X 10MM socket pin C (4 ) B (1 ) computer box alternate support bracke
Mounting patterns using alternate support brackets (C) and M5 X 10mm type-F socket pin screws (F).
Mounting DS496 to MOD-FPSKIT100-B, MOD-FPSKIT150-B, MOD-FPSKIT100, and MOD-FPSKIT150 using four M4 X 10MM socket pins (D). D (4 ) M4 X 10MM socket pin 1 Secure tilt box (NOT INCLUDED) to computer box (A) with four M4 X 10MM socket pins (D).
Mounting DS496 to PLCM-2. 1 Center computer box (A) adjustment opening with PLCM-2 holding screw. Secure computer box with four #10 x 1/2" TEK phillips screws (G). ADJUSTMENT OPENING A PLCM-2 HOLDING SCREW G 2 3 Assemble two cable ties (H). H Feed cable tie assembly (H) through computer box (A).
3 Place Mac mini into computer box (A). H A 7.7" 7.7" MAC MINI NOT INCLUDED PLCM 2 NOT INCLUDED 4 Secure Mac mini with cable tie assembly (H).
5 Slide box cover (B) over opening of computer box (A). A PLCM 2 NOT INCLUDED B 6 Secure box cover (B) with two M4 X 10mm serrated washer head socket pin screws (E).
Apple and Mac are trademarks or registered trademarks of Apple Inc. in the U.S. and/ or other countries. Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a recommendation. Peerless Industries, Inc. assumes no responsibility with regard to the performance or use of these products. All understandings, agreements, or warranties, if any, take place directly between the vendors and the prospective users.
