DS-VWM770 46" - 70" (1168 - 1778 cm) MAX 125 lb (56 kg) ENG 1 2013-08-27 #:125-9465-3 2013-10-11
ENG This page intentionally left blank.
WARNING ENG - This product is designed to be installed on wood stud, solid concrete or cinder block walls. Hardware is included for wood stud, solid concrete and cinder block installation. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity.
ENG Parts (Before beginning, make sure you have all parts shown below). Parts List Part Description wall plate Qty. A 1 201-0387 B concrete anchor 4 590-0320 C wood screw 4 5S1-015-C03 D locking tab 1 200-1871 E .
G (4) H (5) cable tie M5 x 10mm I (4) M4 x 12mm J (1) M5 x 40mm K (1) 4mm allen wrench L (2) Q (4) shoulder washer N (4) M (1) adapter bracket M10 x 15mm plate assembly O (4) M5 x 8mm P (4) M6 x 12mm R (4) M8 x 15mm 5 2013-08-27 #:125-9465-3 2013-10-11
1 A ENG Remove 2 ENG Wood stud wall. ENG Concrete/Cinder block. 2a 2a 2b 2a-1 WARNING ENG Use stud finder to locate and mark stud center lines. ENG ENG - When installing Peerless wall mounts on a wood stud wall covered with gypsum board (drywall), verify that the woods studs are a minimum of 2" x 4" nominal size. When installing to more than one stud, ensure the spacing between studs is at least 16" but does not exceed 24". Do not install over gypsum board thicker than 5/8".
2a-3 2.5" (64mm) 5/32" (4mm) 5/32" (4mm) ENG Drill mounting holes into supporting surface (2.5" (64mm) minimum depth required). ENG Mounting hole must center on stud. 2a-4 ENG Level wallplate. Install using wood screws provided. A C (4) ENG Maximum 80 in. • lb (9 N.M.).
2b WARNING ENG • When installing Peerless wall mounts on a concrete wall, the wall must be at least 8" thick with a minimum compressive strength of 2000 psi. • When installing Peerless wall mounts on a cinder block wall, the cinder blocks must meet ASTM C-90 specifications and have a minimum nominal width of 8". Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" (25 mm) minimum from the side of the block.
2b-3 B ENG Insert anchor flush to concrete. B (4) 2b-4 1b-4 ENG Level wallplate. Install using concrete anchors and wood screws provided. A ENG Maximum 80 in. • lb (9 N.M.).
3 A 10 2013-08-27 #:125-9465-3 2013-10-11
4 ENG Setting the angle of the display. 4-1 ENG The viewport is used to reveal notches indicating the view of the display. M ENG Rotating Plate ENG Notch ENG Viewport 4-2 ENG Line up the viewport with the desired view.
5 ENG Leaving ¼", thread two M10 x 15mm (N) screws through plate assembly (M) and rotating plate. ENG Rotating Plate M N 6 ENG Slide plate assembly (M) into adapter bracket (L) slots.
6-1 ENG Determine VESA mounting pattern.
6-2 L Q P, R 6-3 ENG Secure plate assembly (M) to adapter bracket (L) with four M5 x 8mm screws (O). L M O ENG Do not use screws on inner adapter bracket opening.
7 ENG Slide M10 x 15mm screws (N) of plate assembly (M) into top two key holes of wall plate (A).
9 ENG Display adjustment.
10 ENG Use legend below to determine position of display. NOTE: Each knob can be adjusted independently for fine tuning adjustments. Turn knob CLOCKWISE to move corner toward the wall. Turn knob COUNTER-CLOCKWISE to move corner away from the wall.
11 ENG OPTIONAL: Alternative wall plate (A) lock-down positions. 11-1 ENG Wall plate (A) lock-down in retracted position. A J (1) 11-2 ENG Wall plate (A) lock-down one arm in place.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
Peerless-AV 2300 White Oak Circle Aurora, IL 60502 Email: tech@peerlessmounts.com Ph: (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com © 2013, Peerless Industries, Inc.
