Product data

8
ISSUED: 04/24/2013 SHEET #: 125-9433
Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.
7
Attach two horizontal rails assemblies onto vertical supports (A) using 16 1/4-20 x 3.5" hex head screws (J), 1/4"
SAE washers (F) and 1/4-20 nylock nuts (K) as shown in detail 2. Make sure that horizontal rail
assemblies are level then tighten all 1/4-20 x 3.5" hex head screws (J). Place two tube caps (R) into tops of vertical
supports (A) as shown in detail 2.
A
F
K
J
Y
A
J
J
DETAIL 2
R
CABLE MANAGEMENT
8
NOTE: Display cables can be covered using
18" mesh sleeve (M) before securing.
Display cables can be secured to horizontal
rails assemblies using cable ties (Q) as needed
through slots in horizontal rails (Y).
Q
M
Y
A
Y
SLOT