Product data

ManualsBrandsPeerless ManualsTVs & monitorsDS-VWC555-3X2

ISSUED: 04/24/2013 SHEET #: 125-9433

Visit the Peerless Web Site at www.peerless-av.com For customer care call 1-800-865-2112.

Installation and Assembly: 3 x 2 Cart

Model: DS-VWC555-3x2

Maximum Load Capacity 650lbs (295kg)

1. All dimensions:

Font = Arial Regular 8 pt

mm color = black

inch color = Pantone 201C (SMYK)

2. Captions:

Font = Century Gothic/Bold 10 pt

Color = black

1. All dimensions:

Font = Arial Regular 4.8 pt

Color = black

2. Captions:

Font = Century Gothic/Bold 6 pt

Color = black

3. Sub-captions:

Font = Century Gothic/Bold 4.8 pt

Color = black

4. Line drawings:

Color = black

Line weight = from .5 to 1 pt (visual call depending on

drawing)

All arrows must be the same style

3. Sub-captions:

Font = Century Gothic/Bold 8 pt

Color = black

4. Line drawings:

Color = black

Line weight = from .5 to 1 pt (visual call depending on drawing)

All arrows must be the same style

A R C H I T E C T S S P E C I F I C A T I O N S

CATALOG LINE DRAWING TEMPLATE

PRODUCT DATA SHEET TEMPLATE

W: 7.8883" x H: 4.3737"

W: 4.7431" x H: 2.6944"

Model: DS-VWC555-3X2

The Video Wall Cart shall be a Peerless model DS-VWC555-3X2 and shall be located where indicated on the plans. Assembly

and installation shall be done according to instructions provided by the manufacturer.

119.21"

(3028mm)

114.66"

(2912mm)

99.52"

(2528mm)

31.94"

(811mm)

39.28"

(998mm)

12.14"

(308mm)

FRONT VIEW SIDE VIEW

COMPATIBILITY FORMULA

ADAPTER BRACKET

SIDE VIEW

± 0.63” (16mm)

Height and Depth

Adjustment

5.91"

(150mm)

7.87"

(200mm)

11.81"

ADAPTER

PLP

PLATE

(300mm)

13.78"

(350mm)

15.75"

(400mm)

0.63"

(16mm)

0.63"

(16mm)

Display width must be ≥ 39.75”

Display height must be no < 31.94”

Two display widths + hole pattern width must be <114.65”

119.21"

(3028mm)

114.66"

(2912mm)

99.52"

(2528mm)

31.94"

(811mm)

39.28"

(998mm)

12.14"

(308mm)

FRONT VIEW SIDE VIEW

COMPATIBILITY FORMULA

ADAPTER BRACKET

SIDE VIEW

± 0.63” (16mm)

Height and Depth

Adjustment

5.91"

(150mm)

7.87"

(200mm)

11.81"

ADAPTER

PLP

PLATE

(300mm)

13.78"

(350mm)

15.75"

(400mm)

0.63"

(16mm)

0.63"

(16mm)

Display width must be ≥ 39.75”

Display height must be no < 31.94”

Two display widths + hole pattern width must be <114.65”

Summary of content (16 pages)

PAGE 1
. All dimensions: Font = Arial Regular 8 pt mm color = black inch color = Pantone 201C (SMYK) 2. Captions: Font = Century Gothic/Bold 10 pt Color = black 3. Sub-captions: Font = Century Gothic/Bold 8 pt Color = black 4. Line drawings: Color = black Line weight = from .5 to 1 pt (visual call depending on drawing) All arrows must be the same style Installation and Assembly: 3 x 2 Cart PRODUCT DATA SHEET TEMPLATE Model: DS-VWC555-3x2 W: 7.8883" x H: 4.
PAGE 2
Parts List: 202-1526 (FINAL ASSEMBLY) Part Description Quantity Part Number A vertical support 2 145-1543 B adapter brackets 12 145-1711 C horizontal support 3 145-1382 D shelf 1 145-1361 E 5” caster 4 600-0026 F 1/4” flat washer 48 540-9440 G M8 x 25mm phillips screw 16 520-1031 H 5/16 flat washer 16 540-9406 I 5/16 split washer 16 540-9405 J 1/4-20 x 3.5” hex head screw 48 520-1656 K 1/4-20 nylock nut 48 530-9413 L .38 OD x .
PAGE 3
A H G F N S C B O D I P E J Q K L M R T 3 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 04/24/2013 SHEET #: 125-9433 For customer care call 1-800-865-2112.
PAGE 4
U X V Y W Z AA BB CC DD EE FF 4 Visit the Peerless Web Site at www.peerless-av.com GG ISSUED: 04/24/2013 SHEET #: 125-9433 For customer care call 1-800-865-2112.
PAGE 5
Assembling Cart 1 Attach two horizontal supports (C) to vertical support (A) using eight 1/4-20 x 3.5" hex head screws (J), 1/4" SAE washers (F) and 1/4-20 nylock nuts (K). C K F J A 2 Attach horizontal supports (C) to second vertical support (A) using eight 1/4-20 x 3.5" hex head screws (J), 1/4" SAE washers (F) and 1/4-20 nylock nuts (K). Attach horizontal support (C) to vertical supports (A) using eight 1/4-20 x 3.5" hex head screws (J), 1/4" SAE washers (F) and 1/4-20 nylock nuts (K).
PAGE 6
4 Attach four swivel casters (E) to vertical supports (A) using sixteen M8 x 25 mm pan phillips screws (G), split washers (I) and 5/16" SAE flat washers (H). G I H E A 5 Attach two rail brackets (Y) together using two rail connection brackets (X) with eight M5 x 10 mm pan phillips screws (AA), lock washers (CC), and flat washers (BB). X BB CC AA Y 6 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 04/24/2013 SHEET #: 125-9433 For customer care call 1-800-865-2112.
PAGE 7
6 Determine position of horizontal rails assemblies using the formula below. 1. Locate the position of the lower horizontal rail assemblies and attach to vertical supports (A). 2. Use display height to determine location of upper horizontal rail assemblies, NOTE: Horizontal rail assemblies must be secured using sixteen 1/4-20 x 3.5" hex head screws (J).
PAGE 8
7 Attach two horizontal rails assemblies onto vertical supports (A) using 16 1/4-20 x 3.5" hex head screws (J), 1/4" SAE washers (F) and 1/4-20 nylock nuts (K) as shown in detail 2. Make sure that horizontal rail assemblies are level then tighten all 1/4-20 x 3.5" hex head screws (J). Place two tube caps (R) into tops of vertical supports (A) as shown in detail 2. K Y F R J J J A A CABLE MANAGEMENT 8 DETAIL 2 NOTE: Display cables can be covered using 18" mesh sleeve (M) before securing.
PAGE 9
NOTE: Connection brackets (GG) orientation. Place connection brackets (GG) onto rail connection brackets (X) as shown below. X RIGHT SIDE GG FRONT OF DISPLAY CART X LEFT SIDE GG FRONT OF DISPLAY CART 9 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 04/24/2013 SHEET #: 125-9433 For customer care call 1-800-865-2112.
PAGE 10
9-1 Attach connection brackets (GG) onto rail connection brackets (X) as shown below. Secure one connection brackets (GG) with four M5 x 10 mm phillips screws (AA), lock washers (CC), and flat washers (BB) as shown below. Repeat step for remaining connection bracket (GG). GG BB AA CC X FRONT BACK 10 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 04/24/2013 SHEET #: 125-9433 For customer care call 1-800-865-2112.
PAGE 11
10 Attach adapter brackets (B) to back of display using four M6 x 12 mm phillips screws (O) or M6 x 16 mm Phillips screw (HH) with nylon shoulder washer (L), or four M8 x 15 mm phillips screws (N) as shown below. Adapter Bracket Mounting Patterns B 200 mm MIN 600 mm MAX L 200 mm DISPLAY 400 mm 300 mm PLP PLATE N or O,HH B 11 Hook display and adapter brackets (B) onto horizontal rail assemblies as shown below. NOTE: Start with bottom display.
PAGE 12
Fasten shelf (D) onto horizontal support (C) using three self-drilling screws (FF) as shown below. C FF D 12 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 04/24/2013 SHEET #: 125-9433 For customer care call 1-800-865-2112.
PAGE 13
Adapter Bracket Adjustment 13 Use legend below to determine position of display. NOTE: Each knob can be adjusted independently for fine tuning angle adjustments. Turn knobs CLOCKWISE to raise display height. Turn knobs CLOCKWISE to push out display. Turn knobs COUNTER-CLOCKWISE to lower display height. Turn knob COUNTER-CLOCKWISE to pull in display. UP DOWN IN OUT KNOB 13 Visit the Peerless Web Site at www.peerless-av.
PAGE 14
Attaching Covers 14 NOTE: Position bottom front and back covers first Position front bottom cover (U). Secure covers in place using four decorative screws (DD) as shown below. Position back bottom cover (V). Secure covers in place using four decorative screws (DD) as shown below. Position upper covers (W) on front and back of vertical supports (A). Secure upper covers at top (W) with two 1/4-20 x 3.5” hex head screws (J), two 1/4” flat washer (F), and two 1/4-20 nylock nuts (K).
PAGE 15
Attach two retaining spacers (EE), and decorative screws (DD) to side cover (Z) as shown to right. Attach side cover to vertical support (A) so that it goes inside the lower front and back covers (U and V). Z A EE DD 15 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 04/24/2013 SHEET #: 125-9433 For customer care call 1-800-865-2112.
PAGE 16
Peerless-AV 2300 White Oak Circle Aurora, IL 60502 Email: tech@peerlessmounts.com Ph: (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com © 2013, Peerless Industries, Inc. 16 Visit the Peerless Web Site at www.peerless-av.com ISSUED: 04/24/2013 SHEET #: 125-9433 For customer care call 1-800-865-2112.