manual

Installation and Assembly:

Cable Management Bracket for Linear Display Mounting Kits

Model: DS-ACC-LDCM

3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.peerlessmounts.com

ISSUED: 06-14-10 SHEET #: 120-9089-1

Some parts may appear slightly different than illustrated.

Before you begin, make sure all parts shown are included with your product.

A B

Parts List

Qty.

Part Number

A cord management bracket 1

024-1046

B M5 x 25 mm socket pin screw 2 520-1122

C cable tie 4

560-9711

Description

PAGE 1
Installation and Assembly: Cable Management Bracket for Linear Display Mounting Kits Model: DS-ACC-LDCM Before you begin, make sure all parts shown are included with your product. Parts List A B C Description cord management bracket M5 x 25 mm socket pin screw cable tie A Qty. 1 2 4 B Part Number 024-1046 520-1122 560-9711 Some parts may appear slightly different than illustrated. C 3215 W. North Ave. • Melrose Park, IL 60160 • (800) 729-0307 or (708) 865-8870 • Fax: (708) 865-2941 • www.
PAGE 2
Attaching Cable Management Bracket 1 Hook cable management bracket (A) onto wall plate (SOLD SEPARATELY) and slowly swing down as shown in figure 1.1. Hand thread two M5 x 25 mm socket pin screws (B) through cable management bracket (A). Using 4 mm allen wrench (SUPPLIDED WITH WALL PLATE), turn screws clockwise until screw tip securely contacts wall plate as shown in figure 1.2. NOTE: Displays may need to be removed in order to access center of wall plate (SOLD SEPARATELY).