manual

2 of 3
ISSUED: 09-30-11 SHEET #: 009-9063-1
Attach universal adapter plate and hook plate to
interface bracket (B) with four M10 x 15 mm button
socket cap screws.
Attach interface bracket (B) onto center mount (A)
using four M5 x 6 mm socket pin serrated washer
head screws (D). Tighten screws using 4 mm
security allen wrench (G).
B
B
A
D
NOTE: If you are adding a new video conferencing shelf to an already assembled product, reverse steps up to the
universal plate installation step (removing screen and adapter plate) following the main instruction sheet.
1 2
UNIVERSAL
ADAPTER PLATE
HOOK PLATE
M10 X 15 MM
SOCKET SCREWS
Attach video conference shelf (C) to center mount (A) with two 1/4 x 12 mm decorative screws (F) and two square
nuts (E) as shown below.
3
C
F
E
A