IP Phone User Manual

2.3 System Data Control
Feature Guide 311
2.3.7 Software Upgrading
Description
It is possible to upload software from a personal computer to the PBX to upgrade the following:
Conditions
• The software version of the MPR can be confirmed through system programming ( Main
Processing (MPR) Software Version Reference [190]).
Installation Manual References
Installation Manual
<KX-TDA100/KX-TDA200>
2.3.1 MPR Card
Data File Storage Area
Main Processing (MPR)
software data
Operating system data area on either the
MPR card of the KX-TDA100/KX-TDA200,
or the Main Board of the KX-TDA15/KX-
TDA30.
Default data of system
programming for each country/
area
Country/area data area on the MPR card or
Main Board
Language data for PT display Each language data area on the MPR card
or Main Board.
There are two types:
Type 1: PT display except for PT system
programming ( 2.3.2 PT Programming)
(five languages max.)
Type 2: PT system programming data (one
language max.)
LPR (software on a slot card)
software data (KX-TDA100/
KX-TDA200 only)
Flash ROM on the slot card (e.g., BRI8)
Cell Station (CS) software data Flash ROM on the CS