IP Phone User Manual

2.2 System Configuration—Software
Feature Guide 291
[Time Table Example]
3. Features Using Time Service
The following features can be set in each time mode (day/lunch/break/night):
a) Destination of incoming trunk calls (DIL/DID/DDI/MSN) ( 1.1.1 Incoming Trunk
Call Features)
b) Destination of the Intercept Routing ( 1.1.1.6 Intercept Routing)
c) Queuing Time Table for incoming call distribution groups ( 1.2.2.3 Queuing
Feature)
d) Overflow destination for incoming call distribution groups ( 1.2.2.5 Overflow
Feature)
e) Destination of incoming doorphone calls ( 1.16.1 Doorphone Call)
f) PBX operator ( 2.2.5 Operator Features)
g) COS for TRS/Barring and for Trunk Access
h) Outgoing Message (OGM) for Timed Reminder ( 1.26.4 Timed Reminder)
i) Intercept time for Intercept Routing—No Answer ( 1.1.1.6 Intercept Routing)
and for DISA Intercept Routing—No Answer ( 1.16.6 Direct Inward System
Access (DISA))
[Programming Examples of DID/DDI Table and DIL Table]
DID/DDI table can be programmed for each DID/DDI number, and a tenant (Time Table)
number is assigned to each DID/DDI number. DIL table can be programmed for each
trunk, and a tenant (Time Table) number is assigned to each trunk.
Day 1 start
Lunch start
Day 2 start
Break 1 start
Break 1 end (Day restart)
Night start
Day 1 start
Lunch start
Day 2 start
Break 1 start
Break 1 end (Day restart)
Night start
:
08:00
12:00
13:00
NONE
NONE
16:00
08:00
12:05
13:00
NONE
NONE
16:31
:
11:00
NONE
NONE
NONE
NONE
20:00
11:00
NONE
NONE
NONE
NONE
20:00
:
MON
TUE
:
Time Schedule
Time Table No. (Tenant No.)
1 2 34
00:00
Time Table No.
<Time Service Image of Monday and Tuesday>
08:00 11:00 12:0013:00 16:00 20:00
Night Day 1 Day 2 Lunch Night
Night Day 1 Night
08:00
16:00
NONE
NONE
NONE
12:00
08:00
13:00
NONE
NONE
NONE
17:00
:
08:00
12:00
NONE
NONE
NONE
NONE
08:00
13:00
NONE
NONE
NONE
NONE
:
…
…
…
…
…
…
…
…
…
…
…
…
…
24:00 08:00
Day 1
Night
Night
Day 1
Day 1
Night
Day 1
Day 1
1
2
3
4
Lunch
Lunch
…