Installation Manual

Visit the Peerless Web Site at www.peerlessmounts.com

Installation and Assembly:

WALL PLATE ACC KIT FOR PSTA-%, PSTK-%

Models:

ISSUED: 03-23-09 SHEET #:055-9262-1

WBK100,

WBK100-W

IMPORTANT: Read instruction sheet before you start installation and assembly.

NOTE: Some parts may appear slightly different than illustrated.

Select model of projector wall arm. Secure wall arm (sold separately) to wall plate (A) using four carriage bolts (E)

and lock nuts (D).

PSTA-028, PSTA-028-W

PSTK-028, PSTK-028-W

PSTA-2955, PSTA-2955-W

PSTK-2955, PSTK-2955-W

Sold Separately

WBK-100

WBK-100-W

Description Qt

. Part # Part #

wall plate 1

055-1923 055-2923

#14 x 2.5 phillips hex head wood screw 4

5S1-015-C03 5S1-015-C04

concrete anchor

4 590-0320 590-0320

lock nut 4

530-1016 530-2016

carriage bolt 4

520-9207 520-2047

Parts List

PAGE 1
Installation and Assembly: Models: WBK100, WBK100-W WALL PLATE ACC KIT FOR PSTA-%, PSTK-% IMPORTANT: Read instruction sheet before you start installation and assembly. Parts List A B C D E Description wall plate #14 x 2.5 phillips hex head wood screw concrete anchor lock nut carriage bolt WBK-100 Qty.
PAGE 2
Installation to Wood Stud Walls WARNING • Installer must verify that the supporting surface will safely support the combined load of the equipment and all attached hardware and components. • Tighten wood screws so that wall plate is firmly attached, but do not overtighten. Overtightening can damage the screws, greatly reducing their holding power. • Never tighten in excess of 80 in. • lb (9 N.M.). • Make sure that mounting screws are anchored into the center of the stud.
PAGE 3
Installation to a concrete or cinder block wall WARNING • When installing Peerless wall mounts on cinder block, verify that you have a minimum of 1-3/8" of actual concrete surface in the hole to be used for the concrete anchors. Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" minimum from the side of the block. Cinder block must meet ASTM C-90 specifications.