Installation and Assembly: Medical Antimicrobial Cart for 32" - 65" Flat Panel Displays Models: SR560M-AB, SR560M-AW Max UL Load Capacity: 150 lb (68 kg) screen 50 lb (22.7 kg) per shelf Features: • Treated with Agion® antimicrobial finish in black or white designed to assist with infection control. 2300 White Oak Circle • Aurora, Il 60502 • (800) 865-2112 • Fax: (800) 359-6500 • www.peerlessmounts.
NOTE: Read entire instruction sheet before you start installation and assembly. WARNING • Do not begin to install your Peerless product until you have read and understood the instructions and warnings contained in this Installation Sheet. If you have any questions regarding any of the instructions or warnings, for US customers please call Peerless customer care at 1-800-865-2112, for all international customers, please contact your local distributor.
Before you begin, make sure all parts shown are included with your product. Parts may appear slightly different than illustrated. Parts List A B C D E F G H I J L M N O P Q R S T U V W X Z AA BB CC DD EE FF GG HH II JJ KK LL MM NN OO Description screen mount bracket hook plate shelf support base universal plate adapter bracket upright top cover 1/4-20 x 12mm decorative screw 1/4-20mm nut 3/8-16 x 2.
Parts List continued P O G A L N C X B I OO M W Q Z J D R U H T S V Universal Adapter Plate, Brackets and Hardware included with model SR560M only AA II BB KK CC EE DD LL MM JJ FF NN GG HH F E Some parts may appear slightly different than illustrated.
1 Insert right leg (S) into base housing (D) as shown in fig. 1.1. Then align holes in right leg with holes in base housing (D). Fasten base housing to right leg using two 3/8-16 x 1.5" bolts (W) and two joint connectors (V). Tighten using 3/16" allen wrench (Z) and 7/32" allen wrench (M) as shown in fig.1.2. NOTE: Left and right legs can be identified by looking at the cart from the front. Repeat for left side with left leg (R). fig. 1.1 fig. 1.
3 Attach upright (G) to base (D), as shown in fig 3.1 using three 3/8-16 x 2.5" socket screws (L) and M10 x .402ID lock washers (X). Tighten screws using 7/32" allen wrench (M). NOTE: Be sure cord management holes are in the configuration shown in fig 3.2. fig. 3.2 fig. 3.1 G CORD MANAGEMENT HOLES D X L 4 Loosely attach four 1/4-20 x 12 mm screws (I) and 1/4-20 nuts (J) to shelf support (C).
5 Slide shelf support (C) onto upright (G) so that 1/4-20 nuts (J) slide into slots of upright (G) as shown in figure 5.1 and detail 1. Slide shelf support to desired height, level, then tighten 1/4-20 x 12mm screws (I) using 4 mm allen wrench (N). NOTE: MAXIMUM OF TWO SHELVES Max height of top shelf is 34" from base. Max height of second shelf is 28" from base. C J G SLOT DETAIL 1 fig. 5.
Attaching Metal Shelf 6 Attach shelf pan (P) to shelf support (C) using six 8/32 nylock nuts (O) as shown below. Use an adjustable wrench to tighten six 8/32 nylock nuts (O). WARNING • This shelf is intended for use with equipment weighing NO more than 50 lbs. (22.7 kg) that fits evenly accross the surface of shelf pan (P). Use with other equipment may result in instability and cause personal injury or property damage.
7 Loosely attach six 1/4-20 x 12 mm screws (I) and 1/4-20 nuts (J) to screen mount bracket (A). Slide screen mount bracket (A) onto upright (G) so that 1/4-20 nuts (J) slide into slots of upright (G) as shown in figure 8.1 and detail 2. Slide screen mount bracket to desired position, level, then tighten 1/4-20 x 12 mm screws (I) using 4 mm allen wrench (N). 8 A A J I J I G DETAIL 2 SLOT G fig. 8.1 9 Snap top cover (H) onto upright (G).
Attaching Universal Adapter Plate or Dedicated Adapter Plate 11 Attach Universal Plate (E) to hook plate (B) using four M10 x 15 mm socket screws (OO). Tighten screws using 6 mm allen wrench (Q). 12 Attach hook plate (B) to screen mount bracket (A). B B E A OO 13 Insert two 1/4-20 x 12 mm screws (I) into holes indicated below for desired screen orientation. Tighten all screws using 4 mm allen wrench (N).
Installing Adapter Brackets to Universal Plate WARNING • Tighten screws so adapter brackets are firmly attached. Do not tighten with excessive force. Overtightening can cause stress damage to screws, greatly reducing their holding power and possibly causing screw heads to become detached. Tighten to 40 in. • lb (4.5 N.M.) maximum torque.
For Flat Back Screen 14-1 Begin with the shortest length screw, hand thread through multi-washer and adapter bracket into screen as shown below. Screw must make at least three full turns into the mounting hole and fit snug into place. Do not over tighten. If screw cannot make three full turns into the screen, select a longer length screw from the baffled fastener pack. Repeat for remaining mounting holes, level brackets and tighten screws. NOTE: Spacers may not be used, depending upon the type of screen.
Mounting and Removing Flat Panel Screen WARNING • Always use an assistant or mechanical lifting equipment to safely lift and position the plasma television. 15 Hook adapter brackets (F) onto universal plate (E), then slowly swing screen in as shown. Turn screws of adapter plate (F) clockwise at least six times to prevent screen from being removed as shown in detail 4. NOTE: Tighten using 4 mm allen wrench (N). E SCREWS Screen can be adjusted horizontally if desired.
Recommended Cleaning Guidelines The following procedures are not guaranteed to control infection. An infection control administrator or epidemiologist should be consulted regarding cleaning procedures and processes. WARNING • To avoid risk of electric shock, do not expose electrical components to water, cleaning solutions or other potentially corrosive liquids or substances.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product’s manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
