Installation

4 of 4
ISSUED: 06-16-08 SHEET #: 120-9049-1
Visit the Peerless Web Site at www.peerlessmounts.com
For customer care call 1-800-865-2112 or 708-865-8870.
Pull T-handle to release sprocket as shown in figure 4.1,
allowing rotation of screen to desired viewing angle as
shown in figure 4.2. Release T-handle and engage with
sprocket to restrict rotation of screen.
fig. 4.1
T-HANDLE
SECURITY
SCREW
fig. 4.2
Adjustment of Orientation
• It may be necessary to disconnect cables before rotating into extreme angles. Failure to do so may result in property
damage or serious injury.
• Always use an assistant or mechanical lifting equipment to safely lift, position, and align equipment.
WARNING
OPTIONAL: To prevent screen rotation, fully
tighten security screw against T-handle flange
as shown in detail 1.
4
T-HANDLE
FLANGE
SECURITY SCREW
T-HANDLE
DETAIL 1
DETAIL 2
ACCESS
WINDOW
T-HANDLE
SECURITY SCREW
To rotate screen, disengage security screw
from T-handle flange using 4 mm security allen
wrench (E) until screw tip is flush with access
window as shown in detail 2 and follow step 4.
5