Installation

ManualsBrandsPeerless-AV ManualsHardwareRMI1

1 of 4

ISSUED: 06-16-08 SHEET #: 120-9049-1

Visit the Peerless Web Site at www.peerlessmounts.com

For customer care call 1-800-865-2112 or 708-865-8870.

Installation and Assembly:

Rotational Mount Interface

Models: RMI1

Before you begin, make sure all parts shown are included with your product.

Parts may appear slightly different than illustrated.

Description Qt

. Part #

universal rotational mount 1 120-1183

M10 x 15 mm round socket head screw 8 520-9262

M6 x 10 mm socket pin head screw 4 520-1066

multi-washer 4 580-1036

4 mm security allen wrench 1 560-1727

6 mm allen wrench 1 560-9716

Parts List

B C DA

Accessories

• ACC170 - Rotational Mount Adapter Plate

for Carts and Stands

Summary of content (4 pages)

PAGE 1
Installation and Assembly: Rotational Mount Interface Models: RMI1 Before you begin, make sure all parts shown are included with your product. Parts may appear slightly different than illustrated. Parts List A B C D E F Description universal rotational mount M10 x 15 mm round socket head screw M6 x 10 mm socket pin head screw multi-washer 4 mm security allen wrench 6 mm allen wrench A Qty.
PAGE 2
Attaching Rotational Mount to PLP Model Adapter Plate NOTE: Dedicated PLP model adapter plate not included. For screen compatibility please call customer care to purchase a dedicated PLP adapter plate. 1 If necessary, disengage T-handle from sprocket plate of rotational mount (A) and rotate sprocket so largest hole pattern aligns with clearance holes of sprocket. Align inner most M10 hole set and fasten rotational mount assembly (A) to PLP adapter plate with four M10 x 15 mm screws (B) as shown.
PAGE 3
Installing Wall Mount Hook Bracket Installing Ceiling Mount Tilt Bracket 3-1 3-2 Attach hook bracket to rotational mount (A) using the M10 x 15 mm screws provided with hook bracket as shown below. Attach tilt bracket to rotational mount (A) using the M10 x 15 mm screws provided with tilt bracket as shown below. M10 X 15 mm screws M10 X 15 mm screws HOOK BRACKET TILT BRACKET A A NOTE: Reinstall hook bracket to wall mount according to wall mount instructions.
PAGE 4
Adjustment of Orientation WARNING • It may be necessary to disconnect cables before rotating into extreme angles. Failure to do so may result in property damage or serious injury. • Always use an assistant or mechanical lifting equipment to safely lift, position, and align equipment. 4 Pull T-handle to release sprocket as shown in figure 4.1, allowing rotation of screen to desired viewing angle as shown in figure 4.2. Release T-handle and engage with sprocket to restrict rotation of screen.