Installation & Assembly

8 of 24

ISSUED: 11-21-07 SHEET #: 202-9254-2 02-22-08

Visit Peerless website at www.peerlessmounts.com For customer care call 1-800-729-0307 or 708-865-8870

Mounting and Removing Flat Panel Screen

Hook adapter brackets (BB) onto wall plate (AA).

Then slowly swing screen in as shown. Turn safety/

security screws, using security allen wrench (FF),

clockwise at least six times to prevent screen from

being removed as shown in cross section of fig. 3.1.

Screen can be adjusted horizontally if desired as

shown in figure 3.2.

NOTE: To lock the screen down, tighten safety/

security screws to wall plate as shown in cross

section.

To remove screen from mount, loosen safety/security

screws, swing screen away from mount, and lift screen

off of mount.

• Always use an assistant or mechanical lifting equipment to safely lift and position the flat panel screen.

WARNING

• Do not tighten screws with excessive force.

Overtightening can cause damage to mount. Tighten

screws to 40 in. • lb (4.5 N.M.) maximum torque.

CAUTION

fig 3.1

All other brand and product names are trademarks or registered trademarks of their respective owners.

fig 3.2

CROSS SECTION

SAFETY/

SECURITY

SCREWS