DST970X2 Installation and Assembly MAX LOAD: 200LBS (90KG) 32" - 65" (81 - 165 cm) POSSIBLE INTERFERENCE WITH LARGER DISPLAYS FACING THE SAME DIRECTION.
Parts List A Part Description tube 1.9 od, 6" for ext006 Quantity 2 Part Number 128-1094 B dual cross support 44" assy, blk 1 139-1015 C bolt 3/8-16x4.50" hxh, zb 1 520-9548 D nut 3/8-16 nylock 1 530-9310 E retaining collar, black finish 3 1800-375 F wshr fiber 1.906idx 2.875 od x 0.062 1 540-9431 G scr tap m5 x .8 x 10mm typ f pan phl zb 1 520-9250 H ceiling arm box, blk 2 201-1062 I plasma/lcs tilt brkt w/logo, blk 2 200-1552 J scr tap m5 x .
A B C I E J K L M T U V W H G F N O Q P R Y D S Z AA BB X CC 3 2013-05-08 #:125-9426-1
1 Slide dual cross support (B) onto the end of the extension pipe (sold separately). Rotate dual cross support (B) to desired positon. Drill 3/8" diameter hole through existing hole in dual cross support (B) into extension pipe (sold separately), repeat on oppostie side. Thread one 4.5” hex bolt (C) through the front of the dual cross support (B) and extension pipe. Secure .5” hex bolt (C) with one 3/8-16 nylock nut (D).
Secure PLP plates (P) to tilt brackets (I) using M10 x 15mm penta-pin screws (L). Hook PLP plates (P) to ceiling arm boxes (H). Tighten the M10 x 15mm penta-pin screws (L) to secure assembly. EXTENSION PIPE NOT INCLUDED P L I P 6 H x2 Center adapter brackets (O) vertically on back of display. X O O X OPTIONAL Use of spacers.
9 Hook displays onto PLP plates (P). P Adjust displays horizontally as needed. Secure displays by tightening adapter bracket screw.
10 Adjust displays as desired.
Peerless-AV 2300 White Oak Circle Aurora, IL 60502 Email: tech@peerlessmounts.com Ph: (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com © 2013, Peerless Industries, Inc.
