DSF290 TRUSS MOUNT FOR 12” TRUSS WITH 2” OUTER DIAMETER TUBING 40" - 90" (102-229 cm) MAX 175 lb (79 kg) SF640 Mount Compatability for DSF290 SF650 SF660 ST640 ST650 ST660 SP850 FPS-1000 PS-1 PS-2 DS-VW765-LAND HPF650 DSVW655 1 03-13-13 #:125-9414-2 (04-02-13)
03-13-13 #:125-9414-2 (04-02-13)
WARNING ENG - Before installing make sure the supporting truss will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product is intended for indoor use only. Use of this product outdoors could lead to product failure or personal injury.
Parts List Part Description Quantity Part Number A hook on adapter bracket 2 202-1532 B 1/4-20 x 1/2" taptite phillips screw 4 520-1592 C knob 2 560-0255 D M8 x 16mm phillips screw 4 520-9257 E M6 x 12mm phillips screw 4 520-1128 Parts (Before beginning, make sure you have all parts shown below) A (2) hook on adapter bracket B (4) taptite phillips screw D (4) C (2) M8 x 16mm phillips screw knob E (4) M6 x 12mm phillips screw 4 03-13-13 #:125-9414-2 (04-02-13)
vv Horizontal Truss Configuration Reference a SF640 Mount Compatability for DSF290 SF650 SF660 d,f ST640 ST650 a,c ST660 b 15.75” 400mm SP850 b,e 7.87” 200mm 3.94” 100mm FPS-1000 c e 7.87” 200mm 11.
2 A C 3a-1 15.75” 400mm x3 7.87” 200mm 3.94” 100mm Screws must get at least three full turns and fit snug. 7.87” 200mm 11.81” 300mm Locate appropriate mounting hole positions for specific display VESA pattern and secure using hardware provided as shown.
3a-2 Hook the assembly on and secure using the two knobs to clamp onto the truss.
3b-1 Install additional accessory mount using instructions supplied with separate product models. ST650 DEPICTED SUPPLIED SEPARATELY 3b-2 Loosely fasten the hook on adapter brackets to the truss so they are secured but can still be repositioned.
3b-2 Use the outermost compatible hole positions to mount the plate supplied with separate mount and secure using taptite screws provided. Tighten knobs firmly to secure assembly to truss NOTE: ST650 DEPICTED MOUNTING PLATES MAY VARY SLIGHTLY VERTICAL TRUSS B Use the outermost compatible hole positions to mount the plate supplied with separate mount and secure using taptite screws provided.
03-13-13 #:125-9414-2 (04-02-13)
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
Peerless-AV 2300 White Oak Circle Aurora, IL 60502 Email: tech@peerlessmounts.com Ph: (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com © 2013, Peerless Industries, Inc.
