Installation User Manual

2 of 3











A

C

This VCR mount can be used with two different types of TV mounts/stands. As a result, you will not use all of

the fasteners provided. Follow the instructions for the type of TV mount/stand you have.





f you have the TV mount/stand pictured below and the mount is

already assembled, it will have to be disassembled to do this instal-

lation.





2 3

L, N, & M 

TV does not need to be removed for this installation.





There are two small holes, on the bottom of the bar that runs

underneath the tray. If you do not see them, the bar was probably

installed upside down when the TV mount/stand was assembled. You

will need to remove the tray and the bar to turn it around so that the

holes face downward.

IMPORTANT:Be sure to reuse carriage bolt, brass washer

and lock nut included with wall mount.





