DS-S560-B2X2 46" - 60" (117 -152 cm) MAX 800 lb (363 kg) ENG 1 2015-06-12 #:126-9066-2 (2015-02-05)
WARNING ENG - This product is designed to be installed on solid concrete. Hardware is included for solid concrete installation. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail. Never exceed the Maximum Load Capacity. Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
Parts (Before beginning, make sure you have all parts shown below).
H (4) dual cross support F (4) outer support bracket K (64) L (16) M (8) N (16) O (4) M8 x 16mm M8 square nut cover clip M5 x 10mm knurled knob P (1) Q (1) R (32) S (32) 1/4" power bit 5mm allen wrench nylon shoulder washer M6 x 12mm J (4) T (1) cord bracket 4mm allen wrench V (8) U (8) rawl bolt M6 x 35mm 4 2015-06-12 #:126-9066-2 (2015-02-05)
1 x2 A B U (4) 5 2015-06-12 #:126-9066-2 (2015-02-05)
2 ENG Repeat for each vertical support bracket (x4).
3-1 3-2 x2 M (4) C J O I TIGHTEN CONNECTING HARDWARE I J O TOP VIEW 7 2015-06-12 #:126-9066-2 (2015-02-05)
4-1 4 4-2 ENG Drill mounting holes into supporting surface (3" (76 mm) minimum depth required). ENG Align base. Mark mounting holes. 3/8" (10mm) 3" (76mm) 3/8" (10mm) 55.00" (1397mm) 4-3 3/8" (10mm) ENG Align base. Install using concrete anchors provided. V (8) ENG Tighten. 55.00" (1397mm) ENG Maximum 35 ft • lb (47 N.M.).
5-1 H(2) TIGHTEN HARDWARE (X4) TIGHTEN HARDWARE (X4) ENG Cross supports must center on columns.
5-2 H(2) TIGHTEN HARDWARE (X4) TIGHTEN HARDWARE (X4) ENG Cross supports must center on columns.
6 ENG Center adaptor brackets vertically on back of screen. X .98" (25mm) 15.75" (400mm) 7.87" (200mm) 3.94" (100mm) 11.81" (300mm) 2.50" (63mm) X 2.50" (63mm) 0.
7-1 ENG Hook on displays and secure pin in "locked" position. "LOCKED" POSITION 7-2 ENG OPTIONAL: Insert M5 x 10mm type-F socket pin screws to lock latches.
Display Adjustment IN OUT TILT FORWARD SIDE SIDE TILT BACKWARD SIDE TILT RIGHT TILT LEFT TOP TOP SIDE UP DOWN ROTATE LEFT 13 ROTATE RIGHT 2015-06-12 #:126-9066-2 (2015-02-05)
8 ENG Route cables through cord brackets.
ENG This page was intentionaly left blank 15 2015-06-12 #:126-9066-2 (2015-02-05)
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless”) warrants to original end-users of Peerless® products will be free from defects in material and workmanship, under normal use, for a period of five years from the date of purchase by the original end-user (but in no case longer than six years after the date of the product's manufacture). At its option, Peerless will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
