Instruction Manual

ManualsBrandsPeerless-AV ManualsAccessoriesModular LED Wall Mount for Absen Acclaim Plus/Pro

2020-08-10 #:146-9051-1

ENG

DS-LEDM Series

Summary of content (44 pages)

PAGE 1
DS-LEDM Series ENG 1 2020-08-10 #:146-9051-1
PAGE 2
WARNING ENG - This product is designed to be installed on plywood walls, solid concrete or cinder block walls. Hardware is included for plywood installation. This product is designed to be installed on flat, unobstructed, vertical walls. Do not install on curved or angled walls. Before installing make sure the supporting surface will support the combined load of the equipment and hardware. Screws must be tightly secured. Do not overtighten screws or damage can occur and product may fail.
PAGE 3
ENG Tools Needed for Assembly.
PAGE 4
ENG Parts (Before beginning, make sure you have all parts shown below). Parts List A B C D E F Description wall plate bobbin #14-10 x 1.75" wood screw bobbin screw M5 x 8mm philips screw combination tool A (1) wall plate Qty 1 4 4 4 4 1 B (4) bobbin E (4) M5 x 8mm D (4) bobbin screw C (4) #14-10 x 1.
PAGE 5
1-1 ENG Sold separately. ESP Vendidos por separado. FRN Vendu séparément. DEU Separat verkauft. NEL Apart verkocht. ITL Venduto a parte. ČEŠ Prodává se samostatně. SLK Predáva sa samostatne. POR Vendido em separado. TÜR Ayrıca satılır.
PAGE 6
1-3 ENG Sold separately. ESP Vendidos por separado. FRN Vendu séparément. DEU Separat verkauft. NEL Apart verkocht. ITL Venduto a parte. ČEŠ Prodává se samostatně. SLK Predáva sa samostatne. POR Vendido em separado. TÜR Ayrıca satılır. 1-4 ENG Sold separately. ESP Vendidos por separado. FRN Vendu séparément. DEU Separat verkauft. NEL Apart verkocht. ITL Venduto a parte. ČEŠ Prodává se samostatně. SLK Predáva sa samostatne. POR Vendido em separado. TÜR Ayrıca satılır.
PAGE 7
2 3 4-1 3 ENG Plywood ENG Concrete/Cinder block 3a 3b 7 2020-08-10 #:146-9051-1
PAGE 8
3a WARNING ENG - When installing Peerless wall mounts on a wood stud wall covered with plywood, verify that the wood studs are a minimum of 2" x 4" nominal size and plywood is a minimum Grade BC, 1/2" (13mm) thick. Plywood may be covered by gypsum board (drywall) up to 5/8" thick. 3a-1 ENG Level wall mount and mark mounting holes on plywood (must be minimum Grade BC, 1/2" (13mm) thick). 3a-2 1.75" (44mm) 5/32" (4mm) 5/32" (4mm) ENG Drill mounting holes into supporting surface (1.
PAGE 9
3a-3 1/4" (6mm) 3/8" (10mm) C (2) 3a-4 9 2020-08-10 #:146-9051-1
PAGE 10
3a-5 ENG Mark mounting holes on plywood (must be minimum Grade BC, 1/2" (13mm) thick). 3a-6 1.75" (44mm) 5/32" (4mm) 5/32" (4mm) ENG Drill mounting holes into supporting surface (1.75" (44mm) minimum depth required).
PAGE 11
3a-7 ENG Sold separately. ESP Vendidos por separado. FRN Vendu séparément. DEU Separat verkauft. NEL Apart verkocht. ITL Venduto a parte. ČEŠ Prodává se samostatně. SLK Predáva sa samostatne. POR Vendido em separado. TÜR Ayrıca satılır. ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR 3/8" (10mm) Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximaal 80 in. • lb (9 N.M.). Massima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.).
PAGE 12
3a-9 3/8" (10mm) ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximaal 80 in. • lb (9 N.M.). Massima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maksimum 80 in. • lb (9 N.M.).
PAGE 13
ENG This page intentionally left blank.
PAGE 14
3b WARNING ENG - When installing Peerless wall mounts on a concrete wall, the wall must be at least 8" thick with a minimum compressive strength of 2000 psi. When installing Peerless wall mounts on a cinder block wall, the cinder blocks must meet ASTM C-90 specifications and have a minimum nominal width of 8". Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" (25mm) minimum from the side of the block.
PAGE 15
3b-3 ENG Insert anchor flush to concrete. ESP Inserte el anclaje a ras con el concreto. FRN Insérez la cheville d’ancrage au ras du béton. DEU Setzen Sie den Dübel bündig mit dem Beton abschließend ein. NEL Breng anker aan gelijk met beton. ITL Inserire il fermo a paro col calcestruzzo. ČEŠ Přestrčte ukotvenia priamo do betónu. SLK Prestrčte ukotvenia priamo do betónu. POR Introduza a bucha encastrada no betão. TÜR Tespit demirini betona takın. ENG Sold separately; ACC234.
PAGE 16
3b-5 3b-6 ENG Mark mounting holes.
PAGE 17
3b-7 2.5" (64mm) 5/16" (8mm) 5/16" (8mm) ENG Drill mounting holes into supporting surface (2.5" (64mm) minimum depth required). ENG Do not drill into mortar joints. 3b-8 ENG Insert anchor flush to concrete. ESP Inserte el anclaje a ras con el concreto. FRN Insérez la cheville d’ancrage au ras du béton. DEU Setzen Sie den Dübel bündig mit dem Beton abschließend ein. NEL Breng anker aan gelijk met beton. ITL Inserire il fermo a paro col calcestruzzo. ČEŠ Přestrčte ukotvenia priamo do betónu.
PAGE 18
3b-9 ENG Sold separately. ESP Vendidos por separado. FRN Vendu séparément. DEU Separat verkauft. NEL Apart verkocht. ITL Venduto a parte. ČEŠ Prodává se samostatně. SLK Predáva sa samostatne. POR Vendido em separado. TÜR Ayrıca satılır. ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR 3/8" (10mm) Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximaal 80 in. • lb (9 N.M.). Massima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.).
PAGE 19
3b-11 3/8" (10mm) ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximaal 80 in. • lb (9 N.M.). Massima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maksimum 80 in. • lb (9 N.M.).
PAGE 20
ENG This page intentionally left blank.
PAGE 21
4-1 ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR Remove. quite. retirez. entfernen. verwijderen. rimuovere. odstranit. odstrániť. remova. çıkartın.
PAGE 22
5 ENG Plywood ENG Concrete/Cinder block 5a 5b 5a WARNING ENG - When installing Peerless wall mounts on a wood stud wall covered with plywood, verify that the wood studs are a minimum of 2" x 4" nominal size and plywood is a minimum Grade BC, 1/2" (13 mm) thick. Plywood may be covered by gypsum board (drywall) up to 5/8" thick. 5a-1 ENG Level wall mount and mark mounting holes on plywood (must be minimum Grade BC, 1/2" (13mm) thick.) 5a-2 1.
PAGE 23
5a-3 1/4" (6mm) 3/8" (10mm) C (2) 5a-4 23 2020-08-10 #:146-9051-1
PAGE 24
5a-5 ENG Mark mounting holes on plywood (must be minimum Grade BC, 1/2" (13mm) thick.) 5a-6 1.75" (44mm) 5/32" (4mm) 5/32" (4mm) ENG Drill mounting holes into supporting surface (1.75" (44mm) minimum depth required).
PAGE 25
5a-7 ENG Sold separately. ESP Vendidos por separado. FRN Vendu séparément. DEU Separat verkauft. NEL Apart verkocht. ITL Venduto a parte. ČEŠ Prodává se samostatně. SLK Predáva sa samostatne. POR Vendido em separado. TÜR Ayrıca satılır. ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR 3/8" (10mm) Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximaal 80 in. • lb (9 N.M.). Massima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.).
PAGE 26
5a-9 3/8" (10mm) ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximaal 80 in. • lb (9 N.M.). Massima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maksimum 80 in. • lb (9 N.M.).
PAGE 27
ENG This page intentionally left blank.
PAGE 28
5b WARNING ENG - When installing Peerless wall mounts on a concrete wall, the wall must be at least 8" thick with a minimum compressive strength of 2000 psi. When installing Peerless wall mounts on a cinder block wall, the cinder blocks must meet ASTM C-90 specifications and have a minimum nominal width of 8". Do not drill into mortar joints! Be sure to mount in a solid part of the block, generally 1" (25mm) minimum from the side of the block.
PAGE 29
5b-3 ENG Insert anchor flush to concrete. ESP Inserte el anclaje a ras con el concreto. FRN Insérez la cheville d’ancrage au ras du béton. DEU Setzen Sie den Dübel bündig mit dem Beton abschließend ein. NEL Breng anker aan gelijk met beton. ITL Inserire il fermo a paro col calcestruzzo. ČEŠ Přestrčte ukotvenia priamo do betónu. SLK Prestrčte ukotvenia priamo do betónu. POR Introduza a bucha encastrada no betão. TÜR Tespit demirini betona takın. ENG Sold separately; ACC234.
PAGE 30
5b-5 5b-6 ENG Mark mounting holes.
PAGE 31
5b-7 2.5" (64mm) 5/16" (8mm) 5/16" (8mm) ENG Drill mounting holes into supporting surface (2.5" (64mm) minimum depth required). ENG Do not drill into mortar joints. 5b-8 ENG Insert anchor flush to concrete. ESP Inserte el anclaje a ras con el concreto. FRN Insérez la cheville d’ancrage au ras du béton. DEU Setzen Sie den Dübel bündig mit dem Beton abschließend ein. NEL Breng anker aan gelijk met beton. ITL Inserire il fermo a paro col calcestruzzo. ČEŠ Přestrčte ukotvenia priamo do betónu.
PAGE 32
5b-9 ENG Sold separately. ESP Vendidos por separado. FRN Vendu séparément. DEU Separat verkauft. NEL Apart verkocht. ITL Venduto a parte. ČEŠ Prodává se samostatně. SLK Predáva sa samostatne. POR Vendido em separado. TÜR Ayrıca satılır. ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR 3/8" (10mm) Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximaal 80 in. • lb (9 N.M.). Massima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.).
PAGE 33
5b-11 3/8" (10mm) ENG ESP FRN DEU NEL ITL ČEŠ SLK POR TÜR Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximaal 80 in. • lb (9 N.M.). Massima 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Maximum 80 in. • lb (9 N.M.). Máxima 80 in. • lb (9 N.M.). Maksimum 80 in. • lb (9 N.M.).
PAGE 34
6a-1 ENG Tie a string (not included) between either the left or right slot on the top edge of the wall plate. Tie the other end of the string to the plumb bob (not included) in the two locations shown. Align the string to each groove of the depth adjustment housing vertically.
PAGE 35
6a-2 F ENG Adjust using the combination tool (F) to align depth.
PAGE 36
6a-3 ENG Tie a string (not included) between the center slots of wall plate on the four locations shown to align each groove of the depth adjustment housing horizontally.
PAGE 37
6a-4 F ENG Adjust using the combination tool (F) to align depth.
PAGE 38
6b-1 ENG Tie a string (not included) between either the left or right slot on the top edge of the wall plate. Tie the other end of the string to the plumb bob (not included) in the two locations shown. Align the string to each groove of the depth adjustment housing vertically.
PAGE 39
6b-2 F ENG Adjust using the combination tool (F) to align depth.
PAGE 40
6b-3 ENG Tie a string (not included) between the center slots of wall plate on the four locations shown to align each groove of the depth adjustment housing horizontally.
PAGE 41
6b-4 F ENG Adjust using the combination tool (F) to align depth.
PAGE 42
7 x3 x4 B (4) D (4) 8 ENG Attach displays, tighten latching hardware, and run cables one at a time starting from the bottom.
PAGE 43
9 ENG To remove, start from the top. Remove latching hardware, disconnect cables, and remove LED's one at a time.
PAGE 44
ENG Warranty ITL Garanzia ESP Garantía ČEŠ Záruka FRN Garantie SLK Záruka DEU Garantie POR Garantia NEL Garantie TÜR Garanti̇ www.peerless-av.com/warranty Peerless-AV 2300 White Oak Circle Aurora, IL 60502 Email: tech@peerlessmounts.com Ph: (800) 865-2112 Fax: (800) 359-6500 www.peerless-av.com Peerless-AV Europe Unit 3 Watford Interchange, Colonial Way, Watford, Herts, WD24 4WP, United Kingdom Customer Care 44 (0) 1923 200 100 www.peerless-av.com Peerless-AV América Latina Av.