DS-C555-4X3 46" - 55" (117 - 140 cm) MAX 1200 lb (545 kg) ENG 1 2015-06-24 #:009-9118-6 (2019-09-04)
WARNING ENG - Do not begin to install product until you have read and understood the instructions and warnings contained in this user guide. Always use an assistant or mechanical lifting equipment to safely lift and position equipment. This product must be installed onto flat, hard, level surface to prevent tipping. Use with heavier displays may result in instability causing tip over resulting in death or serious injury.
ENG This page intentionally left blank.
ENG Parts (Before beginning, make sure you have all parts shown below).
N (6 ) P (1 ) dual cross support O (1 ) computer shelf computer cover S (3 ) M (6 ) vertical support bracket bracket, 4x2 configuration Q (3 ) extension adaptor R (6 ) cord bracket T (6 ) knob U (244) V (80) W (36) X (26) Y (34) AA (1) 5mm allen wrench M8 x 16mm M8 square nut BB (48) nylon shoulder washer cover clip M5 x 10mm CC (48) Z (1 ) 1/4" power bit DD (1) 4mm allen wrench M6 x 12mm 5 bar nut 2015-06-24 #:009-9118-6 (2019-09-04)
1-1 x6 B AA A U (4) 1-2 x6 ENG Do not fully tighten hardware AA V (2) U (2) SIDE VIEW 6 2015-06-24 #:009-9118-6 (2019-09-04)
2 x3 AA V (4) V (4) D F U (4) V (4) F U (4) 7 2015-06-24 #:009-9118-6 (2019-09-04)
3 AA x3 D TIGHTEN CONNECTING HARDWARE ENG Flush edges ENG Casters must be flush to end of horizontal leg support.
5-1 x2 TIGHTEN CONNECTING HARDWARE AA H 5-2 TIGHTEN CONNECTING HARDWARE AA H 9 2015-06-24 #:009-9118-6 (2019-09-04)
6-1 x3 AA ENG Do not fully tighten hardware U (4) Q Y (2) TOP VIEW 6-2 AA TIGHTEN CONNECTING HARDWARE I (3) Q (3) 10 2015-06-24 #:009-9118-6 (2019-09-04)
7 ENG LOCK WHEELS TIGHTEN CONNECTING HARDWARE AA E E 8 x6 1/8" (3mm) V (4) 1/8" (3mm) U (6) AA M 11 2015-06-24 #:009-9118-6 (2019-09-04)
a 9 ENG Use metric formula below and diagram to the right to determine hole pattern required for center vertical support bracket. Repeat (x2). All dimensions are metric.
10 M (6) AA S (3) DIS DIS PL PL AY H AY H EIG EIG TIGHTEN CONNECTING HARDWARE HT HT 13 2015-06-24 #:009-9118-6 (2019-09-04)
11-1 AA TIGHTEN CONNECTING HARDWARE N (2) 14 2015-06-24 #:009-9118-6 (2019-09-04)
11-2 AA TIGHTEN CONNECTING HARDWARE N (2) 15 2015-06-24 #:009-9118-6 (2019-09-04)
11-3 AA TIGHTEN CONNECTING HARDWARE N (2) 16 2015-06-24 #:009-9118-6 (2019-09-04)
12 AA V (8) U (8) TIGHTEN CONNECTING HARDWARE U (2) J V (2) J (4) 17 2015-06-24 #:009-9118-6 (2019-09-04)
13-1 X x12 K ENG Center adaptor brackets vertically on back of screen.
14-1 "LOCKED" POSITION ENG Must hang displays on bottom row first; Secure pin in "locked" position. 14-2 "LOCKED" POSITION ENG Must hang displays on middle row second; Secure pin in "locked" position.
14-3 "LOCKED" POSITION ENG Must hang displays on top row last; Secure pin in "locked" position. 14-4 DD ENG Optional: Insert M5 x 10mm type-F socket pin screws (X) to lock latches.
15 ENG Display adjustment IN OUT SIDE SIDE TILT BACKWARD TILT RIGHT SIDE TILT LEFT TOP SIDE UP TILT FORWARD TOP DOWN ROTATE LEFT 21 2015-06-24 ROTATE RIGHT #:009-9118-6 (2019-09-04)
16 TIGHTEN CONNECTING HARDWARE R (6) T (6) R T TOP VIEW ENG Optional: Unlock wheels to move cart to desired location; Lock wheels before hanging screens.
17 X (24) C (6) 23 2015-06-24 #:009-9118-6 (2019-09-04)
18 P 24 2015-06-24 #:009-9118-6 (2019-09-04)
19-1 DD 1/8" (3mm) P X (2) 19-2 DD O TIGHTEN CONNECTING HARDWARE P 25 2015-06-24 #:009-9118-6 (2019-09-04)
20 ENG Route cables through cord brackets.
21-1 ENG Display removal ENG Pull down on bracket cords and hold. ENG Swing screen away from cart and lift to remove. 21-2 "UNLOCKED" POSITION ENG Remove displays from top row first.
21-3 "UNLOCKED" POSITION 21-4 "UNLOCKED" POSITION ENG Remove displays from middle row second. ENG Remove displays from bottom row last.
ENG This page intentionally left blank.
ENG This page intentionally left blank.
ENG This page intentionally left blank.
LIMITED FIVE-YEAR WARRANTY Peerless Industries, Inc. (“Peerless-AV”) warrants to original end-users that each Peerless-AV® mounting product will be free from defects in material and workmanship, under normal use, for the applicable warranty period (from date of the original installation of the product). At its option, Peerless-AV will repair or replace, or refund the purchase price of, any product which fails to conform with this warranty.
